X
Collapse
-
McConnel - Lost Shop Tour?
While digging through the old site files, I ran across this PDF file that had no information other than a number of pictures. The file title was McConnell.pdf I can't find any reference to it on the site.
Original PDF Document:
McConnell.pdfTags: None-
#1Carlos commented08-27-2018, 09:25 PMEditing a commentWhat's in the PVC tubes?
-
#2twistsol commented08-28-2018, 05:51 AMEditing a commentMy guess would be shop vac hoses. It looks like the bottom one has a 4" adapter on it.
Posting comments is disabled. -
Categories
Collapse
Article Tags
Collapse
- BT3x00 (71)
- bt3000 (5)
- bt3100 (2)
- diy (2)
- dust collection (11)
- Enhancements & Modifications (5)
- Fence Attachments (12)
- General (5)
- Hand Tool Accessories (3)
- Hand Tools (14)
- Measuring & Layout (6)
- miter fence (3)
- Mobile BT3x00 (9)
- Mobile Tools (9)
- Other Reviews (4)
- Other Tools (5)
- Power Tool Accessories (28)
- Power Tools (75)
- rails (3)
- rip fence (5)
- router table (1)
- safety (5)
- Sharpening (4)
- t-nut (3)
- wide table kit (2)
Latest Articles
Collapse
-
by twistsolWhile digging through the old site files, I ran across this PDF file that had no information other than a number of pictures. The file title was McConnell.pdf I can't find any reference to it on the site....
-
Channel: Miscellaneous
08-27-2018, 08:39 PM -
-
by twistsolOriginally posted by JP Honeywell
This calculator was originally posted to SamConder.com in the articles section. The cove cut calculator allows you to calculate the fence angle to use a table saw to cut a cove of a desired width and depth using a given blade.
...-
Channel: Miscellaneous
06-17-2015, 07:48 AM -
-
by Jim FryeFor many years, I have been using the power switch on my BT3000 to turn on the shop vac as well as the saw itself. My old shop vac was a low powered unit and together with the BT3K’s motor didn’t exceed the 20 amp. rating of the contacts in the switch. That all changed when I replaced the shop vac with an industrial model of Shop Vac. After several weeks of forgetting to turn on the vac when I started the saw, I knew I had to go back to the automatic method of starting the dust collector. Fortunately, Sears had the solution for this problem. They have a $20 tool triggered outlet device that plugs into a standard duplex outlet and provides two outlets that are switched on when the tool that is plugged into the primary receptacle on the device is turned on....
-
Channel: Miscellaneous
04-29-2015, 08:10 AM -
-
by staffOriginally Posted by Ray Girling in the category Miscellaneous
Kickback – The Nightmare Explained Most tablesaw owners dread kickback without necessarily understanding what it is and more importantly, what causes it. Knowing that it involves a piece of stock coming back towards you is fine, but as with most technical matters, once you understand how and why it happens, you’ve got much more chance of preventing it. These words and pictures are an attempt to get back to basics and de-mystify the subject. ...-
Channel: Miscellaneous
04-29-2015, 06:52 AM -
-
by Sam ConderA Virtual Tour of the Indianapolis Woodworking Show This weekend, I made my annual trek to the Indianapolis woodworking show. I have been going every year for the past five years. This year, I was finally fortunate to have a bit of extra money and was able to attend one of the all day seminars. Below are some photos I took specifically for this site. I wanted to give those of you who are not able to attend the shows a glimpse of what they are all about. I struggled with the decision of which w...
-
Channel: Miscellaneous
04-29-2015, 04:49 AM -
-
by Sam ConderIn a “Fundamentals of Woodworking” class I attended taught by Marc Adams at the Indianapolis woodworking show, he stated that he uses ordinary white glue instead of yellow glue for the majority of his joinery. I decided to do a little research on the two types of adhesives and was surprised by what I found. White glues like Elmer's Glue-All are polyvinyl acetate (PVA) based adhesives. Yellow glues like Pro-Bond and Titebond are aliphatic resin glues, which are merely PVA adhesives with additives t...
-
Channel: Miscellaneous
04-29-2015, 04:39 AM -
The SawdustZone Statistics
Collapse
Topics: 61,285
Posts: 558,566
Members: 20,628
Active Members: 64
Welcome to our newest member, buildergenius.
What's Going On
Collapse
There are currently 5369 users online. 2 members and 5367 guests.
Most users ever online was 11,606 at 02:28 AM on 03-29-2024.
Footer Ad
Collapse