61 results in 0.0120 seconds.
Keywords
Members
Tags
-
Turning off BT3*00 from left side; another view
-
Created by:
cwithboat
- Published: 01-12-2008, 09:17 AM
- 0 comments
Turning off BT3*00 from left side; another view
After reading Ed62’s article I was invigorated. During my first use of my new 21829, I felt the need for left side turn off and Ed had supplied an answer. I sat before my saw and considered Ed’s solution. Good, but I thought I saw another approach. I wanted a switch that could be easily added or removed, one that interfered with saw function to a minimal extent and one that could be adjusted to eliminate any slop in my construction efforts. (This is important; I received my training as an electrical... -
Created by:
-
Turning off BT3*00 from left side
After searching this site, and not being able to find an easy way to turn off the BT3*00 from the left side, I decided to post the very easy, very inexpensive, and quick solution I designed for mine. It is made from ¾” PVC pipe, elbows, a tee, and 2 short pieces of ¾” hardwood dowel. I did not glue the parts together, but they have a tight fit. If you prefer to use glue, please do, but make certain it will work (without modification), by dry fitting the assembly, and trying it before gluing. W...
-
Zero Clearance Throat Plates with Levelers
-
Created by:
Stytooner
- Published: 11-27-2012, 12:14 AM
- 0 comments
Zero Clearance Throat Plates with Levelers
Custom Zero-Clearance Throat Plates With Levelers It occurred to me almost instantly to tap out the 4 holes underneath the TP to a 10-24 thread. I had kind of cussed under my breath at the Ryobi factory for not tapping this there and adding the screws to my parts package. I also wondered why I hadn’t seen this adjustment in the manual. I guess that was not the their intended purpose. ...
-
Created by:
-
Wide Table With Miter Slots
Originally Posted by Dave Johnson in the category BT3000 Modifications & Enhancements Well I have been out in the shop taking some measurements and I think I have everything straight. I will just tell this as a kind of sequence of events to make it easier for myself. I started out buying Ryobi's wide table kit, Part#4730300, and the wide table leg set, Part# 4730305. The wide table kit extends the rails 41" inches and the leg set supports the rails and whatever table you add to it. The wide table kit is around $155 and the leg set is about $35. The wide table setup is only necessary if you want the extended cutting capacity but I would recommend the leg set if you end up with with a table top as thick as mine to keep all the weight off the rails. ...
-
Wide Crosscut Fence For The BT3000
Wide Crosscut Fence for BT3000This fence is used to extend the crosscut capacity of the Sliding Miter Table (SMT) from 16 inches to 23 1⁄2 inches. The design was originally done to address a question someone had asked on the Ryobi toolforum about cross cutting wide panels. After several people had attempted to add a fence to the front edge of the SMT and had drilled holes in the table to do so, some folks argued that there ought to be a way to accomplish the mountin...
Designed by Jim Frye -
The OZ/YANK Router Fence
Originally Posted by Rod Kirby and Randy Atkinson The OZ/YANK Router Fence By Rod Kirby & Randy Atkinson Rod made the brackets and sent them to me. I modified the rear one to slide past Quick- Fold Outfeed Table. I trimmed 1⁄4" off the bottom of the back and cut 1⁄4 slots, so the bracket could slide up and down over the bolts attached to the rear rail. The fence is 1" MDF (back) 37" L X 4" H, with 3⁄4" face of MDF and Rockler High Density Plastic. The base is Baltic Birch 21 3...
-
SMT Mounted Tenon Jig
SMT Mounted Tenon Jig
By Mark “Black Walnut” Stripes
Since the Ryobi BT3 series of table saws does not have a miter slot users are forced to make their own tenon jigs. While building the first prototype I decided that the best way to make it move laterally was to attach it to the SMT using the front t-slot. This jig features micro-adjustment as well as adjustments for different angled tenons. ... -
SMT Mounted Taper Jig
Not another Taper jig! Well, I had fun making it – and it works... -By Rod Kirby Although I designed this for my Aluminum SMT Extension (see SMT Extension), you can also run it along the rip fence. As built, there is 20-3⁄4” between the front of the saw and the miter fence bracket. ...
-
SMT Fence V2.0
SMT Fence V2.0 – By Rod Kirby What did you guys do on 01/01/01 – this is what I did (I’m too old to for hangovers – the morning after isn’t worth the night before!). Please take particular note of the ends I made for the Ryobi fence – more on this later. The main reason I made the new fence, was that I wanted to reduce the number of times I had to take the (Triton) guard on & off: eg guard off – line up the saw with the marked line; Guard on – make the cut. I found I was tending to leave the guard off – NOT SAFE (and it lets the dust fly around. ...
-
SMT Aluminium Extension For The BT3000
-
Created by:
RodKirby
- Published: 01-27-2002, 11:43 AM
- 0 comments
SMT Aluminium Extension For The BT3000
SMT Aluminium extension for the BT3000 See also V1.1 for a useful modification By Rod Kirby This is a follow on from my Miter slot fence (see previous posts). At the time I set up the slot, I made a new miter fence to use with the slot. The new fence is the same height as the one I attached to the original Ryobi fence and uses the same “T” track. This means that I could use all the sliding jigs I already had, for the new fence. I wanted to have something I could attach to the SMT that would let me use the new fence (and maybe others). Looking at Jim Frye’s pics (on Sam’s site), I figured that this was the way to go – with thanks to Jim, this is the result. I trust the photos let you see how easy it is to make....
-
Created by:
-
Shopmade Rip Fence Micro-Adjust
Rip Fence Micro-adjust – By Rod Kirby The reason this thing works, is because of Ryobi’s great Rip fence design. You only have to nudge the “T” end of the fence to move it – the far end is a smoothly moving roller. ...
-
Shopmade Outfeed Cabinet
Originally Posted by Dave Johnson in the category Fence Attachments This project came about because of my lack of cabinet space and my growing dissatisfaction with out-feed rollers. The top I used was 1 1/4” particleboard with a plastic laminate top. I chose this mostly because I had it on hand. You can use whatever you have and adjust the dimensions accordingly. Also, when the slab was poured in the building I am using for a shop they were not very good about leveling it. Because of this I built my cabinet about 1/4” lower than the top of my saw and used Kitchen cabinet type leveling legs to bring it even and level with the saw top. The top of my saw measures 37 1/4” from the ground and sitting flat the height of the cabinet is 37” even. I bought the leg levelers from The Woodworkers Store, Part # 20826. They come four to a set at $9.95 a set. They measure 4” at their shortest and give you 7/8” of adjustment. Phone # is 1-800- 279-4441. ...
-
Shopmade Handles For The BT3000
Originally Posted by J.P. Honeywell in the category BT3000 Modifications & Enhancements A very effective and inexpensive retractable handle system can be made using (4) 3/4“ 1/4-20 u-bolts and (2) 3/4” x 36” black pipe (use longer pipe if you have the wide-table kit). You will also need an additional (4) 1/4-20 nuts. You will also need the Caster The corner bolts on the right side of the stand are almost perfectly spaced for the u-bolts. I found that by threading the 1/4-20 nuts all the way onto o...
-
Ryobi BT3000 Stop Block Construction Notes
-
Created by:
Jim Frye
- Published: 02-26-2002, 11:48 PM
- 0 comments
Ryobi BT3000 Stop Block Construction Notes
Ryobi BT3000 Stop Block Construction Notes By Jim Frye
- Begin by cutting four pieces of 3⁄4-inch thick stock 2-1/4 inches square. The stop block will be stronger if it is made from plywood, but any hard wood will work satisfactorily.
- Glue the four blocks together, clamping until the glue has cured. It is easier to glue two blocks together and then join the two glue-ups together after the first glue-up has cured. If the block is being made from plywood, rotate the plys so that every ply is 90 degrees to the next ply on the adjoining block. If the block is being made from solid hardwood, orient the grain so that all four blocks are the aligned the same.
-
Created by:
-
Ryobi BT3000 Router Fence Construction Notes
-
Created by:
Jim Frye
- Published: 12-26-2002, 11:35 PM
- 0 comments
Ryobi BT3000 Router Fence Construction Notes
Ryobi BT3000 Router Fence Construction Notes Design by Jim Frye This router fence is designed for use with the Ryobi BT3000 rip fence. It is essentially a hollow wooden box that attaches to the top T-slots of the rip fence and encloses the router bit that is mounted in the BT3K accessory table. The fence has a chip collection port at the right end of the fence to be used with a 2 1/2”diameter shop vac hose. The fence also has an adjustable guard for the bit opening, a 6”high fence for handling vertical work pieces and for clamping hold downs, and threaded inserts in the fence face for the attachment of accessory jigs like a pivot pin or a jointer fence. The rip fence remains usable with this router fence mounted. ...
-
Created by:
Top Active Users
Collapse
There are no top active users.
The SawdustZone Statistics
Collapse
Topics: 61,770
Posts: 561,925
Members: 20,859
Active Members: 26
Welcome to our newest member, handcraftedmodelshipsca.
What's Going On
Collapse
There are currently 5798 users online. 0 members and 5798 guests.
Most users ever online was 71,993 at 01:49 PM on 01-13-2026.
