Here's how I do my Featherboard operations. As you know, Featherboards are spring boards meant to hold the workpiece against the fence snugly to ensure accurate rips while freeing both your hands for hand over hand and push stick smooth, even feeding of the workpiece to avoid burning and sawmarks.

The Feather board is the classic one that they suggest you make.... Mine was made 20+ years ago, apparently a 1x4 piece of pine wood with one end cut at 30 degrees. 15-16 inches long 3 to...

With the small t-nut for the front of the rip fence and miter fence, I made a new stop block that can be used on both
https://www.sawdustzone.org/articles...nce-attachment

When used on the rip fence , it can set a stop for cross cutting fixed lengths off a piece against the miter fence without risking a kickback from continuous...

First, thanks again to everyone who helped me sort out the issues with the issues aligning the blade to 0 and 45 degrees.

I'm now tackling...

Small T-nut for the left side of BT3 rip fence or front of miter fence (Article Version)

11-30-2023, 04:00 PM
I have found a perfect T-nut for the front of the BT3 miter fence and for the left side of the rip fence (same extrusion used both places)

Its actually a weld nut, but fits the T-slot described above.

Weld Nut: #10-24 Thread, Tab, 1/32 in Base Ht, 3/8 in Base Wd, 5/8 in Base Lg, Steel, 50 PK
Item 1LAJ3 Mfr. Model 1LAJ3​ (WW Graingers)...

After a bit more thinking, some universal T-bolts for the rip miter fence make more sense than fixture blocks.
The two big slots in the rip fence and the miter fence and the front and rear rails are sized to take 1.00 inches wide x 1/8th and 1-1/8" wide x 1/8th.

So I took some 1/8th flat Aluminum 1.00 inches wide and cut 1-1/8" long to make a 1" x 1-1/8" rectangular plates; I used a short rip fence Block to space the length but not cause a kickback with the...

​
Made this measurement tonight.
Dimensions of all the slots on the Rip/Miter fence (same extrusion if you never knew).
Viewed from...

For more than 15 years I've had this Fasttrak bandsaw fence system on my 12" Delta bandsaw.

I've always used a homemade low rip fence...

BT3000 tall rip fence

09-12-2021, 07:58 PM
I have had a tall BT3000 fence for a number of years, I should have used it a few days ago but I didn't because it was too much trouble, And I paid the price as the tall item was a little unstable and I had a hard time controlling it as the two pieces separated and wallowed out a bigger kerf than I wanted at one place.

Anyway the BT3000 tall fence is generally held on by the T-slots in the side of the rip fence. This is...

I have had a tall BT3000 fence for a number of years, I should have used it a few days ago but I didn't because it was too much trouble, And I paid the...

Hello ! I need a rip fence for a BT3100. Can anybody help ?

We have this article on how to make your own roller holder

https://www.sawdustzone.org/articles...-bt3000-rear-f...

Hi everyone,
I'm looking for replacement front block for BT3100 rip fence. Anyone sitting on a replacement that they are willing to part with? I...

I just bought a BT3000 and am in the process of buying all the missing bits for it (the miter screw and knob was missing from the miter table, the previous...