25 results in 0.0612 seconds.
upgrade bt3000 shims bt3100
-
I wanted to update this thread specifically on the shim and guide holder information, but I will start off with the motor I bought from Ebay and the bearing... -
BT3000 To 3100 Shim Upgrade
-
Created by:
crokett
BT3000 To 3100 Shim Upgrade
Upgrading the shims avoids the issue of the BT3000 shims dropping out and causing the blade-raising mechanism to bind.
Before you begin:
Call Ryobi technical support at 1-800-525-2579 with the serial number from your saw to
verify that your saw is eligible for the upgrade. Some earlier BT3000s are not.
‘Right’ and ‘Left’ designations assume you are starting by looking at the front of the saw....
These instructions assume a stock -
Created by:
-
BT3000 saw for sale $250 (or make offer)
RYOBI BT3000 Table Saw: FOR SALE
BT3000 10” Table Saw, mounted on Ryobi metal stand
Original Ryobi sliding miter table
Wide table kit... -
-
BT3000 To 3100 Shim Upgrade
Upgrading the shims avoids the issue of the BT3000 shims dropping out and causing the blade-raising mechanism to bind.
Before you... -
I haven't looked but i think over the years people have researched and documented exactly what they did and parts they had to buy or make to upgrade their...Last edited by LCHIEN; 01-01-2024, 01:57 PM.Leave a comment:
-
Shim Replacemnet Aaaaiiiiieeeee
This is long, so read on at your own peril.
If you only are replacing shims and reference the next two members you’ll do your self well.... -
For those going down that same road, this article
https://www.sawdustzone.org/forum/vb...pgrade?t=33948...Last edited by LCHIEN; 04-13-2024, 11:20 AM.Leave a comment:
-
shims debacle
Back before Turkey Day my BT3000 had the shim problem. I got the parts to upgrade to the BT3100-style shims but the slider bracket does not want to fit... -
WTB BT3100 or newer BT3000 Motor
Hey I'm looking for a BT3100 motor so I can upgrade my BT3000. I have the old version of the BT3000 with the brush access on the back of the motor instead... -
Old BT3000 switch
I have wanted a BT3000 for several years, so I recently purchased a couple of used tablesaws. My original thought was to use the parts on the older saw... -
Welcome to the group Rob. When you order your belts and shims you may want to order an extra set of belts so you'll always have an extra set on hand....Leave a comment:
-
BT3000 for sale (Atlanta)
Selling my BT3000. Good working order, I've just upgraded to a Powermatic PM1000.
It has had the upgrade to BT3100 shims.
... -
Returning after a few years - need parts for upgrade
It's been a while since I've posted here or at the Ryobi Tool Forums, but I've had a BT3000 for a fair number of years. It's seen only modest use for... -
Welcome to BT3Central, draghkar. It sounds like you got a great deal on that old BT3K, what with getting all the options and evertying. I think you're...Last edited by JR; 11-02-2006, 01:06 PM.Leave a comment:
twistsolThere are currently 3327 users online. 2 members and 3325 guests.
Most users ever online was 15,771 at 02:28 PM on 04-26-2024.
Leave a comment: