•  
  • Time
  • Show
Clear All
new posts

  • All About The World Of Clamps

    All About The World Of Clamps

    *I will be updating this over the next few weeks with additional clamps such as the newer ratcheting style spring clamps, etc.

    Outline of issues addressed in order:
    • What types of Clamps are there?
    • How many Clamps do I need?
    • What is an F-Clamp? What is a Bar Clamp?
    • What is a Parallel Clamp, Parallel Jaw Clamp, “K-Body”, “Cabinet Master”, “Bessey”?
    • What is a pipe Clamp? What is a "Pony" clamp?
    • What is an Aluminum Bar Clamp?
    • What is a Steel Bar Clamp ? What is an
    ...
    Go to post

  • Edge jointing large stock with a router.

    Edge jointing large stock with a router.

    There has been much discussion about how to joint with a router. The often made assumption is that one does not have a jointer, thus requires use of a router for this task. I do have a jointer, but still edge joint with a router for long boards. I find it easier to control, and sometimes quicker. Moving large or long stock over a 6" jointer isn't always an accurate process. My method involves 4 items. - A router - doesn't really matter what one, but runnout is a concern here. - A flush trim ro...
    Go to post

  • Mortise and Loose Tenon video w/ plunge router.

    Mortise and Loose Tenon video w/ plunge router.

    Mortise and tenon is a hallmark of craftsmanship, but it doesn't have to be painful. This type of joint can be made easily with no "special" equipment, such as a mortiser, or a tenoning jig. There are as many ways to do M&T as there are to skin a cat ( I suppose, never skinned a cat though ). My personal favorite is mortise and loose tenon with my bosch plunge router. Mortise and loose tenon VS traditional mortise and tenon: The difference between these two joints is that with a loose te...
    Go to post

  • Potassium dichromate: chemically coloring wood

    Potassium dichromate: chemically coloring wood

    The question comes up occasionally about using chemicals to change the color of wood. Usually the desired result is the color of aged wood--cherry and mahogany come immediately to mind as woods that develop rich, lustrous color when they are aged. Aging is free, but it's slow, and we're impatient woodworkers here in the 21st century. Dye stains can darken cherry or mahogany quickly, but the wood beneath the dye does continue to darken with age, and you can wind up with a darker piece than you re...
    Go to post
There are no articles in this category.
 
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Affiliate Links

Collapse

Latest Articles

Collapse

  • How to drill perfectly placed hole into outside corner
    by LCHIEN
    Trying to drill into a outside 90 degree corner, 45° to each side, is tough, the drill bit keeps wanting to walk off.
    You can whack a small flat on the corner.
    But here is a way I did it perfectly. Using this corner drill jig

    Using the drilling jig, One hand is enough to hold the jig while drilling. The small board touching the top of the jig is my measurement stick. I use that to set the precise reproducible location of the hole relative to the top of the workpiece....
    04-26-2024, 10:41 PM

The SawdustZone Statistics

Collapse

Topics: 61,294   Posts: 558,615   Members: 20,637   Active Members: 70
Welcome to our newest member, cjn.

What's Going On

Collapse

There are currently 9757 users online. 1 members and 9756 guests.

Most users ever online was 15,771 at 02:28 PM on 04-26-2024.

Working...