141 results in 0.0070 seconds.
Keywords
Members
Tags
-
Harbor Freight Circular Saw Blade Sharpener
-
Created by:
fergusburger
- Published: 06-25-2013, 10:42 PM
- 1 comment
in Tool ReviewsHarbor Freight Circular Saw Blade Sharpener
The Chicago Electric Power Tools Professional circular saw blade sharpener (Item#96687 at Harbor Freight) was on sale after coupon for $36 this month. My BT3 was bogging down ripping a stud earlier this week so I figured that after 8 years of intermittent use maybe the blade was due for its first sharpening. I was up for a new learning experience, and I like a bargain, so I picked up the sharpener on Monday. The included instructions are fine for assembling the machine. The machine is lightwei...
-
Created by:
-
in Tool ReviewsHarbor Freight 2Hp Dust Collector
Between sale price and coupon, the price was low enough that I took the plunge and bought the HF 2HP DC. --Starting with assembly:-- You end up doing quite of bit of assembly with this unit, not just 2 or 3 connections. The very first thing I did when unpacking the unit was to plug the motor in to make sure it ran. Sometimes with HF, you can get little surprises and I din't want to assemble the whole thing and then discover the motor didn't work. It fired right up, no problems. I've seen ta... -
Central Machinery model 32208 4 speed 14" bandsaw initial impressions.
-
Created by:

dbhost - Published: 08-11-2008, 09:14 PM
- 52 comments
in Tool ReviewsCentral Machinery model 32208 4 speed 14" bandsaw initial impressions.
The Central Machinery Model 32208 4 speed 14" band saw, and its single speed sibling the 32206 (only difference appears to be the pulley setup), can be an amazing band saw bargain. I purchased mine with a markdown from $329.00 to $299.00, and then used a 15% off any one item in store coupon to get the saw at $255.00 + tax. Aside from a well used saw, even 10" saws are hard to come by in that price... The overall fit and finish of the saw ABOVE the stand appear to be on par with the bottom end ... -
Created by:
-
Craftsman 17539 Biscuit Joiner Review
-
Created by:
JSUPreston
- Published: 04-01-2013, 11:52 AM
- 1 comment
in Tool ReviewsCraftsman 17539 Biscuit Joiner Review
This review should also apply to the Ryobi JM82K, since other than color they are basically the same unit. I believe this is also my first review of a tool here on BT3, so please forgive me if I offend. I'm just trying to offer my honest opinion of a tool purchase. I recently noticed that since I am a Craftsman Club member, I could get a discount on this unit. Also, by cashing in a bunch of rewards points and by ordering online, I was able to walk out the door with the unit for less than $48. N... -
Created by:
-
in Tool ReviewsCraftsman BAS350
Recently, I became the owner of a Craftsman BAS-350 14" band saw. I thought you would be interested in hearing about it, even tho I haven't had a chance to use it much yet. I have owned 2 bandsaws in the past. One was a B&D 10" 3-wheeled job, which I got rid of and bought a Delta 9" model. Turned out it wasn't an upgrade, and I've been watching for a replacement. The wife finally gave me the go-ahead to buy another. Having read good reviews of Sears 10" model here and other web sites, and ... -
Harbor Freight 2-in-1 18gauge stapler/nailer contractor series
-
Created by:
sailor55330
- Published: 01-02-2012, 01:22 PM
- 12 comments
in Tool ReviewsHarbor Freight 2-in-1 18gauge stapler/nailer contractor series
I was wanting to get a staple gun and based on some good feedback from another poster here, I decided to give Harbor Freight a try on this model
http://www.harborfreight.com/18-gaug...7524-3795.html This is the blue contractor series and not the red and silver. The gun is normally $29 and it was on sale for $15.99 so I thought I'd give it a try. Out of the box, the gun feels good in the hand. The trigger is metal as are all other major parts. The gun is slig... -
Created by:
-
in Tool ReviewsJimD's DeWalt DWS520LK Track Saw
We used to always have a "family gift" each Christmas. My kids have homes of their own and my wife is in heaven but I've continued the tradition by buying myself something : ). This year is was a DeWalt track saw with the 102 and 59 inch tracks. I ordered it from Amazon but it was actually supplied by CPO tools. Pretty pricey at nearly $600 but part of my reasoning is that I will probably be doing more for my kids away from my shop. I can't bring my table saw but can bring this. I was also... -
Rockler-glue-brush-vs-Betty-Crocker-Basting-Brush
-
Created by:
Denco
- Published: 05-01-2012, 02:28 PM
- 5 comments
in Tool ReviewsRockler-glue-brush-vs-Betty-Crocker-Basting-Brush
In this corner, we have the Rockler Glue Brush, champion of woodworkers all over, known for it's distinctive "Rockler Blue" design.
http://bt3central.com/attachment.php...1&d=1335900223
And in this corner, we have the challenger, the Betty Crocker Basting Brush, the darling of cooks everywhere, entering the woodworking ring to become the heavyweight gluing champion of the world!
http://bt3central.com/attachment.php...mentid=17705&s... -
Created by:
-
Ridgid 18v Cordless Drill Driver and Impact Driver combo
-
Created by:
linuxmick
- Published: 10-09-2012, 03:52 PM
- 0 comments
in Tool ReviewsRidgid 18v Cordless Drill Driver and Impact Driver combo
Hi there, Back in 2010 my wife insisted we install mirrored doors in both our master bathroom, and my daughters bedroom. At that time I owned a Skil 14.4v drill driver that was on it's last legs and would no longer hold a charge. So I donated that to Goodwill, and set about finding myself a new updated drill driver system. I went to Lowes and picked out a Porter Cable 18v Drill Driver with two Lithium-Ion batteries and a charger. I have other Porter Cable tools so I felt confident in the brand. To ... -
Created by:
-
HF 67241 3-Piece 11 drawer Tool Chest
-
Created by:
leehljp
- Published: 12-02-2011, 12:19 AM
- 8 comments
in Tool ReviewsHF 67241 3-Piece 11 drawer Tool Chest
HF had their 67421 3 piece tool chest on sale for $149 Thanksgiving weekend and I have been looking at that model for some time. Since moving back to the States, I have been "space short", especially for my mechanics tools and even woodworking tools. With permission from LOML, I purchased one and happily brought it home. I was a little concerned after reading a review on the HF web site that listed them as being dented and light weight. My impressions: The tools boxes were in great shape, not ... -
Created by:
-
in Tool ReviewsGroz #5 (Jack) Plane Review
Recently posted about the clearance on Groz planes at Woodcraft (in the Bargain Alert forum). That posting received a lot of comments, so I decided to share my results once my jack plane arrived.
The short story is that the workmanship from the factory was not great. But after a 1/2 hour of tuning it up the plane cuts great and I would not hesitate to do it again. I feel like it was a great value.
Updated (1/31/2012 - adding text from pdf file to cover for my... -
Harbor Freight 5" Random Orbit Sander
-
Created by:
sailor55330
- Published: 07-11-2012, 12:17 PM
- 3 comments
in Tool ReviewsHarbor Freight 5" Random Orbit Sander
I am in the process of restoring my cedar deck and knew that there would be a lot of sanding in the process. Rather than overwork and potentially destroy my PC Random Orbit sander, I chose to pick up a cheap HF sander--on sale for 24.99. FOr the basis of this review, I will compare to my PC 333 5" Random Orbit. The HF specs will always be listed first: Motor: 2a vs. 2.4 No power issues. I ran this sander last night for almost 3.5 hours non stop. It got slightly warm, but nothing serio... -
Created by:
-
PennSt:Variable Speed Midi Lathe Conversion Kit: for Turncrafter , Jet & Delta Lathes
-
Created by:
Denco
- Published: 06-19-2012, 10:49 PM
- 3 comments
in Tool ReviewsPennSt:Variable Speed Midi Lathe Conversion Kit: for Turncrafter , Jet & Delta Lathes
I bought this unit to turn my Turncrafter lathe into a variable speed lathe. In the kit, you get the new brush motor, speed controller, and associated hardware to make the conversion. I bought this unit in Dec 2011. It worked like a dream for 6 mos. Had good linear speed control. Then, during a project I was turning for my sister's birthday this weekend, the unit died. The controller has failed. This was just with occasional use. The motor brushes are fine, the fuse is fine, reset switch is f... -
Created by:
-
in Tool ReviewsStihl 441 w/ mtronic carb
I know chainsaws aren't exactly considered fine wood working tools but...I gotta share this.
Took a new Stihl 441 w/mtronic carb and 25" bar and reg chain out for break in this morning. I only ran through several tanks before the weather went south. This thing is smooth and doesn't bog down. I was blocking 20" to 24" round wet cottonwoods and fir.
I can't wait to see what kind of monster this would be after full break in and skip chain.
-
in Tool ReviewsRyobi JS 480L
Some time ago, local HD gave me a Ryobi JS 480L as a thank you for finding a pricing error (they slapped a ryobi planer price tag on a Ridgid planer --- wish they would have given me the planer, though!). More recently, my daughter commissioned a woodworking job (a cradle for her doll) - so I finally had a good opportunity to use this saw. The saw has a handy LED light that makes work a little more visible. Newer saws have lasers - which I think are over-hyped. The LED is nice. Anoth...
Top Active Users
Collapse
There are no top active users.
The SawdustZone Statistics
Collapse
Topics: 61,771
Posts: 561,927
Members: 20,861
Active Members: 27
Welcome to our newest member, wmstreet@mac.com.
What's Going On
Collapse
There are currently 2934 users online. 0 members and 2934 guests.
Most users ever online was 71,993 at 01:49 PM on 01-13-2026.
