21 results in 0.0048 seconds.
Keywords
Members
Tags
  •  

  • Edge jointing large stock with a router.

    Edge jointing large stock with a router.

    There has been much discussion about how to joint with a router. The often made assumption is that one does not have a jointer, thus requires use of a router for this task. I do have a jointer, but still edge joint with a router for long boards. I find it easier to control, and sometimes quicker. Moving large or long stock over a 6" jointer isn't always an accurate process. My method involves 4 items. - A router - doesn't really matter what one, but runnout is a concern here. - A flush trim ro...
    Go to post

  • Mortise and Loose Tenon video w/ plunge router.

    Mortise and Loose Tenon video w/ plunge router.

    Mortise and tenon is a hallmark of craftsmanship, but it doesn't have to be painful. This type of joint can be made easily with no "special" equipment, such as a mortiser, or a tenoning jig. There are as many ways to do M&T as there are to skin a cat ( I suppose, never skinned a cat though ). My personal favorite is mortise and loose tenon with my bosch plunge router. Mortise and loose tenon VS traditional mortise and tenon: The difference between these two joints is that with a loose te...
    Go to post

  • Treating veneer edges for glue up.

    Treating veneer edges for glue up.

    I have used veneer saws in the past to cut edges for gluing together veneer, and I've compressed it between 2 pieces of 1/4" ply and cut on the TS. These work ok, but I didn't get perfect edges from the veneer saw, and I wasted a good deal of ply on the TS. I just finished a marquetry panel for a project (images soon) and when it came time to veneer, I can to face this problem again. For marquetry, I use shop cut veneer, so that it'll hold together while I make the double bevel cut on the scro...
    Go to post

  • Tapered Legs on the Jointer

    Tapered Legs on the Jointer

    About a year ago I promised a write-up on tapering legs using the jointer. I'm not quick, but I got it done.

    All of the following assumes you've milled your legs to size and have your joinery figured out. In this case I'm using sliding dovetails for the apron to legs, so I did all of that milling first.

    The legs I'm doing are 1 1/2 x 1 1/2 red oak, I'm using a 5/16 depth of cut on the jointer. You can change the depth of cut if you find you're not comfortable with that b...
    Go to post

  • Router Edge Guide For Dado

    Router Edge Guide For Dado

    This is a basic project that I thought would be useful for some of you folks that are new to routers. I tried to photo document, even the relatively evident, so a beginner can use the instructions. I am sure I have borrowed heavily from other people in making the jig, however I didn't use any plans so I am not citing references. Material : Material is a matter of choice. I used 3/8" Baltic Birch because I happen to have a good supply due to a friendly woodworker giving me a bunch of cutoffs....
    Go to post

  • All About The World Of Clamps

    All About The World Of Clamps

    *I will be updating this over the next few weeks with additional clamps such as the newer ratcheting style spring clamps, etc.

    Outline of issues addressed in order:
    • What types of Clamps are there?
    • How many Clamps do I need?
    • What is an F-Clamp? What is a Bar Clamp?
    • What is a Parallel Clamp, Parallel Jaw Clamp, “K-Body”, “Cabinet Master”, “Bessey”?
    • What is a pipe Clamp? What is a "Pony" clamp?
    • What is an Aluminum Bar Clamp?
    • What is a Steel Bar Clamp ? What is an
    ...
    Go to post

Affiliate Links

Collapse

Today's Birthdays

Collapse

Top Active Users

Collapse

There are no top active users.

The SawdustZone Statistics

Collapse

Topics: 61,770   Posts: 561,925   Members: 20,860   Active Members: 26
Welcome to our newest member, handcraftedmodelshipsca.

What's Going On

Collapse

There are currently 4205 users online. 0 members and 4205 guests.

Most users ever online was 71,993 at 01:49 PM on 01-13-2026.

Working...