So while I am aware the HVAC duct CAN be used, but with the direction of the flow / smooth side / crimped side, the duct and fittings are effectively reversed. .
I want to be able to easily flatten out our the crimped side.
So I have a plan, right or wrong, I am thinking taking a couple of cutoff pieces of 2x6, and gluing them so I have a piece of 4x6, using the duct as a drawing template and trace an arch in the glueup.
Once dried and secure, set it on end and cut the curve on the bandsaw.
Using this, with a couple of clamps to basically smoosh the crimps out...
Now the fun part.
I want to be able to easily flatten out our the crimped side.
So I have a plan, right or wrong, I am thinking taking a couple of cutoff pieces of 2x6, and gluing them so I have a piece of 4x6, using the duct as a drawing template and trace an arch in the glueup.
Once dried and secure, set it on end and cut the curve on the bandsaw.
Using this, with a couple of clamps to basically smoosh the crimps out...
Now the fun part.
Comment