1. Turn on the air cleaner
2. Put on the ear muffs
3. Pull the plug when working on/setting tools – MS, Router, BS, DP
4. Change to a ZCTP when making TS vertical cuts and the vice versa: forgetting to change to the stock throat plate when making bevel cuts.
5. Lock the DP table after changing the elevation. It doesn’t rotate usually using a bit once you’ve started the bit it won’t swing on you but the deal is that when the lock is loose the table sags a bit and the spot where the drill bit center hits the wood moves a few thousandths and the hole is no longer perpendicular.
6. Set bandsaw upper guide height just above workpiece
7. Start the vac or DC for the tool I’m using
8. Change the RPM speed of the DP to the appropriate speed
9. Put side shields on the safety glasses I wear
10. Shut down the air compressor when I leave for the evening
11. Turn off the laser on the Miter saw
12. Release bandsaw tension after use (some people say this isn’t necessary). I don't have a quick release.
what stuff do you sometimes forget to do?
OK sometimes you forget on purpose - too lazy.
2. Put on the ear muffs
3. Pull the plug when working on/setting tools – MS, Router, BS, DP
4. Change to a ZCTP when making TS vertical cuts and the vice versa: forgetting to change to the stock throat plate when making bevel cuts.
5. Lock the DP table after changing the elevation. It doesn’t rotate usually using a bit once you’ve started the bit it won’t swing on you but the deal is that when the lock is loose the table sags a bit and the spot where the drill bit center hits the wood moves a few thousandths and the hole is no longer perpendicular.
6. Set bandsaw upper guide height just above workpiece
7. Start the vac or DC for the tool I’m using
8. Change the RPM speed of the DP to the appropriate speed
9. Put side shields on the safety glasses I wear
10. Shut down the air compressor when I leave for the evening
11. Turn off the laser on the Miter saw
12. Release bandsaw tension after use (some people say this isn’t necessary). I don't have a quick release.
what stuff do you sometimes forget to do?
OK sometimes you forget on purpose - too lazy.
Comment