I am building an archery target that will be made of 2 x12 to form a frame similar to a raised planting bed but will stand on end. The front and back will be faced with a fabric similar to nylon burlap. It will be stuffed with recycled clothing, blankets, sheets and other fabric. This target will remain outdoors and I have not had good luck with projects glued with Titebond III holding up outdoors in the past. Want your suggestioins on how to join the corners. Simple butt joint held with screws, or a 1.5 x 1/4 rabbet with screws. Thinking the rabbets would help hold it square over time. Other ideas?
Here is a link to the target, I did not order from the manufacturer of the skin and do not have the build directions. Mine will also be 3' square without the legs vs 4' with legs as in the video. https://youtu.be/sWWBq4DwcOw
Here is a link to the target, I did not order from the manufacturer of the skin and do not have the build directions. Mine will also be 3' square without the legs vs 4' with legs as in the video. https://youtu.be/sWWBq4DwcOw
Comment