What is your prefered substance for rust protection on power tools and hand tools?
I don't like using oil too much, but some things will get a light rub of 3 in 1; Mostly C-Clamps and other threaded items. It's still a dust magnet.
I used Boeshield T-9 on my drill press & jointer. I really like it. The drill press looks just like it did over 14 months ago. I've used some paste wax on the jointer since then.
I've been using paste wax on my chisels & planes.
My shop isn't climate controlled, only some OSB, shingles, and some T1-11 siding are protecting things. Rust can really develop quickly.
I don't like using oil too much, but some things will get a light rub of 3 in 1; Mostly C-Clamps and other threaded items. It's still a dust magnet.
I used Boeshield T-9 on my drill press & jointer. I really like it. The drill press looks just like it did over 14 months ago. I've used some paste wax on the jointer since then.
I've been using paste wax on my chisels & planes.
My shop isn't climate controlled, only some OSB, shingles, and some T1-11 siding are protecting things. Rust can really develop quickly.
Comment