Which Multi-Tester?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 22099
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #16
    i'M ONLY PLANNING TO DROP MINE 29 FEET. how about 29' - will it still work?
    How about take it to that vaunted customer service...
    if you have the hutzpah after dropping it 30'.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • silverfox
      Veteran Member
      • Jul 2003
      • 2863
      • Richland Center WI, USA.
      • BT3100

      #17
      Hmmmn...taking it back after the drop...............
      Mike

      Comment

      • rbfunk
        Established Member
        • Dec 2003
        • 400
        • Garfield, NJ, USA.

        #18
        Thou shalt not expect your test equipment to survive unscathed incidents that would damage you.
        From the 319 rules for technicians
        Bob
        Oh what a tangled web we weave, when we are all hopped up on caffine.

        Comment

        • LCHIEN
          Super Moderator
          • Dec 2002
          • 22099
          • Katy, TX, USA.
          • BT3000 vintage 1999

          #19
          quote:Originally posted by rbfunk

          Thou shalt not expect your test equipment to survive unscathed incidents that would damage you.
          From the 319 rules for technicians
          Bob
          I dunno about that.
          My meters regularly get put across 230V and pass 10's of amps[]. (but not at the same time)
          Loring in Katy, TX USA
          If your only tool is a hammer, you tend to treat all problems as if they were nails.
          BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

          Comment

          • jdschulteis
            Established Member
            • Mar 2003
            • 139
            • Muskego, Wisconsin, USA.
            • Ryobi BT3100

            #20
            quote:Originally posted by silverfox

            HF has their 7 function Multi-Testers on sale again....
            http://www.harborfreight.com/cpi/cta...emnumber=30756
            http://www.harborfreight.com/cpi/cta...emnumber=90899
            I know many members here have one of these and I wonder if someone could tell me which is the best one to buy? It appears that the cheaper one has a continuity response and no battery tester and the more expensive one has a battery tester and no continuity response tester. Although, the copy in these ads is not always accurate. There are other differences as well, I guess....like an auto zero adjust and over range indicator. Since they are both cheap...money is not an issue. I want/need one of these but don't know much about them....which one is the best to own? Thanks.
            Mike
            I have the 30756--as far as I can tell, the only continuity test
            is to set it to one of the ohm ranges and see if it reads near zero.
            It definitely does not have an audible continuity check mode. To
            get that, you have to splurge on the $12.99 90939--which maddeningly
            doesn't seem to have the battery test function of the 90899.
            Jerry

            Comment

            • silverfox
              Veteran Member
              • Jul 2003
              • 2863
              • Richland Center WI, USA.
              • BT3100

              #21
              Hmmm...Thanks Jerry. Glad someone actually has the back lit $12.99 tester. Now I think I will buy that one for the back light and beeper AND the cheaper one with the batt tester. Thanks for all the help everyone...I now know what to do.
              Mike

              Comment

              • LCHIEN
                Super Moderator
                • Dec 2002
                • 22099
                • Katy, TX, USA.
                • BT3000 vintage 1999

                #22
                quote:Originally posted by silverfox

                Hmmm...Thanks Jerry. Glad someone actually has the back lit $12.99 tester. Now I think I will buy that one for the back light and beeper AND the cheaper one with the batt tester. Thanks for all the help everyone...I now know what to do.
                Mike
                what does the batt tester function do that makes it better than just a voltmeter? Does it load the battery as well?
                Loring in Katy, TX USA
                If your only tool is a hammer, you tend to treat all problems as if they were nails.
                BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

                Comment

                • silverfox
                  Veteran Member
                  • Jul 2003
                  • 2863
                  • Richland Center WI, USA.
                  • BT3100

                  #23
                  How would I know???....I'm the one that asked which one to get and admittedly don't know much about them.[:0]
                  Are you saying that I don't NEED a batt tester and would be good to go with the red unit??[?]
                  Mike

                  Comment

                  • LCHIEN
                    Super Moderator
                    • Dec 2002
                    • 22099
                    • Katy, TX, USA.
                    • BT3000 vintage 1999

                    #24
                    quote:Originally posted by silverfox

                    How would I know???....I'm the one that asked which one to get and admittedly don't know much about them.[:0]
                    Are you saying that I don't NEED a batt tester and would be good to go with the red unit??[?]
                    Mike
                    Those are questions I would ask if deciding whether i needed it or not.
                    There's two kinds of "battery test" functions you can get in a meter.
                    Most common they just have an indicator of the correct rnage for a battery like (on analog ones) a green area on the scale between 1.4 and 1.6 volts and red elsewhere. Not really much use unless you are number sense contstricted.
                    The other more very useful and not very common thing is to have a built in load since voltmeters usually present no load. The battery voltage information thus tested under load and the voltage is more correct since an unloaded but nearly dead or defective battery may well show much higher voltage.

                    I would assume its the former type in which case its not worth much unless you like the voltmeter to make the decision about how much voltage is a good or bad battery (which depends upon the cell chemistry type and application) so I don't usually trust their decision anyway.

                    That's a long winded way of saying I doubt the battery test function is worth much.

                    Loring in Katy, TX USA
                    If your only tool is a hammer, you tend to treat all problems as if they were nails.
                    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

                    Comment

                    • foneman
                      Established Member
                      • Jul 2003
                      • 235
                      • kansas, USA.

                      #25
                      I have used multimeters for the last 35 years and never had the need for one with a battery test feature. If you are using that reason as a deciding factor, I think you will find out that you use that feature the least.
                      john

                      Comment

                      • BobSch
                        Veteran Member
                        • Aug 2004
                        • 4385
                        • Minneapolis, MN, USA.
                        • BT3100

                        #26
                        quote:Originally posted by LCHIEN

                        i'M ONLY PLANNING TO DROP MINE 29 FEET. how about 29' - will it still work?
                        How about take it to that vaunted customer service...
                        if you have the hutzpah after dropping it 30'.
                        It would have taken more than hutzpah to get the remains back to HF. We'd have to FIND them all first [:0]

                        PS. I think it was the first ten feet that killed it
                        Bob

                        Bad decisions make good stories.

                        Comment

                        • silverfox
                          Veteran Member
                          • Jul 2003
                          • 2863
                          • Richland Center WI, USA.
                          • BT3100

                          #27
                          OK...thanks, Loring and John. I don't really need it to test batts anyway.
                          Mike

                          Comment

                          • stewchi
                            Established Member
                            • Apr 2003
                            • 339
                            • Chattanooga, TN.

                            #28
                            When I was a kid I had a battery tester from radio shack, (not Multi Meter just battery). When I would use it the battery would get hot and not last real long. After 3 or 4 tests a brand new battery would be dead. I have not used a battery tester since.
                            I use a multi meter to test voltage on some things like car batteries etc but for regular batteries like AA or D cells, it really matters what device is using the batteries. This can make all the difference. One device may work all the way down to half the voltage and another may stop working with the battery at ¾ life.
                            Just my $.02.
                            Just to through this out there I have the cheap yellow tester and the clamp on tester. I was lucky enough when I did my service, the electrician I had come over that helped me pulled out his high end clamp model and I tried my $15 clamp meter and we got the same current reading []

                            Comment

                            • Tundra_Man
                              Veteran Member
                              • Jan 2003
                              • 1589
                              • Sioux Falls, SD, USA.
                              • Ryobi BT3100

                              #29
                              I've got a built-in 9V battery tester. My wife yells at me every time I use it...
                              Terry

                              Life's too short to play an ordinary guitar: Tundra Man Custom Guitars

                              Comment

                              • LCHIEN
                                Super Moderator
                                • Dec 2002
                                • 22099
                                • Katy, TX, USA.
                                • BT3000 vintage 1999

                                #30
                                quote:Originally posted by stewchi

                                When I was a kid I had a battery tester from radio shack, (not Multi Meter just battery). When I would use it the battery would get hot and not last real long. After 3 or 4 tests a brand new battery would be dead. I have not used a battery tester since.
                                I use a multi meter to test voltage on some things like car batteries etc but for regular batteries like AA or D cells, it really matters what device is using the batteries. This can make all the difference. One device may work all the way down to half the voltage and another may stop working with the battery at ¾ life.
                                Just my $.02.
                                Just to through this out there I have the cheap yellow tester and the clamp on tester. I was lucky enough when I did my service, the electrician I had come over that helped me pulled out his high end clamp model and I tried my $15 clamp meter and we got the same current reading []
                                Its kind hard to make a universal battery tester...
                                how many cells and what chemistry, how big a load?
                                I have a battery tester for my 12V car batteries (a HF special), it pulls I think 50A or 100A, they tell you not to press the load button for more than 10 seconds... every few minutes...

                                Loring in Katy, TX USA
                                If your only tool is a hammer, you tend to treat all problems as if they were nails.
                                BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

                                Comment

                                Working...