Fits and spurts. I got siding on 3 sides last week and sprayed a coat of paint on them. The cardboard was screwed on so I didn't make a mess inside the shed. Worked well enough. I'll follow-up with another coat soon especially around the windows and doors (manually) so they can be flashed and installed.
I spent most of yesterday laying out the rafters and cutting birdsmouth in them. Today I screwed them in place and installed the blocking for one of the fly rafters. The front overhang is 18" while the back is just 6". There is 12" overhang on each side.
I also nailed on half the hurricane ties--so...much...hammering.
Now that DST is over, I probably only have time on the weekends for this now. Next weekend I bring my lawn tractor back from my parents' house. Then I can determine how big of a door I need.
I spent most of yesterday laying out the rafters and cutting birdsmouth in them. Today I screwed them in place and installed the blocking for one of the fly rafters. The front overhang is 18" while the back is just 6". There is 12" overhang on each side.
I also nailed on half the hurricane ties--so...much...hammering.
Now that DST is over, I probably only have time on the weekends for this now. Next weekend I bring my lawn tractor back from my parents' house. Then I can determine how big of a door I need.
Comment