I had to attach a header to my brick wall and I tried to use my 1/4" masonry bit and a regular cordless drill. After quite a while of drilling I had almost no penetration to show for it. So off to the internet on how to drill concrete and masonry. They suggest a hammer drill and one place sort of suggested an impact driver and yet another must have been confused because they talked about an impact drill. And some Brits talked about a percussion drill. But I checked and the big difference is tha...

I had the opportunity to purchase a grizzly track saw, the accessory kit, and two sections of 55" track "used" for $200. If purchased directly from Grizzly the "master pack" (which includes the accessory pack) would cost about $316 (plus tax). Allow me to qualify my comments so you can take them for what it's worth. I have never seen a festool anything in person, let alone had the opportunity to use one. I've not seen the dewalt or Makita versions of the track saw either. Also I am an amatuer ...

Today we're going to discuss transfer punches.


$10 set from Harbor Freight #3577 (note: 2022 price is $12)



One trick that some people know is that if you have a drill bit set you also have a fairly accurate set of setup bars. OK, so they're round but you can use the shank end of a 1/8" drill bit to space an item exactly 1/8" away from a fence or set a 1/8" gap between two parallel boards you are fastening down.

The transfer...

After my $1.89 tool review a couple of days ago, I'm shooting for a even lower priced tool review. I don't think anyone can beat this one! Has 32 drill sizes Made in USA! Handy hole for hanging Beautiful black plastic finish won't damage your sharp edged tools (but the tools might damage the gauge) relief bumps 10 mils high for drawing, perhaps? THis came free along with an offer to evaluate tools for free and keep the tools. I don't fall for that Malarky. But the drill bit guide is possibly ...

this is the shortest review for the cheapest tool on BT3Central. I was wasting time at HF the other day so I bought a pocket blow gun 68262 a slim blow gun for the grand price of $1.89 (So this has to be a record low price for a reviewed item here, right?) I figured it would be handy. But, there's no trigger so it blows all the time. At least, it would if the industrial connector machined into it actually fit. I could not lock it to any of the several quick connects I tried to mate it to. The...

I didn't know what I was doing when I bought my first router bit set. I've learned a lot, since. Craftsman sells a 6 piece set ---- and I'll tell you - it's a lousy way to go. The set includes: - cove bit - 3/8" round over (the one piece I use a lot) - 2 straight bits (1/2 and 1/4") - dovetail bit - 1/2 trim bit I did use the straight bits a little - but have since replaced both of them with spirial upcut bits. The round over bit is the single piece I've had a good use for...

I thought that there might be some interest on this forum in my experience ordering for and installing the Grizzly T10223 Sliding Table on my SawStop cabinet saw and my first impression on how it works. I ordered the sliding table via the internet on a Saturday, got confirmation that they received my order within a few hours. Monday they send me the order number, confirmed the cost of the unit $525.00, a discount of $25.00 to equal the UPS brokerage fee (I live in Toronto, Canada) plus ...

Has anyone here tried the HF pocket hole jig # 96264 as yet? I saw one in their local store the other day and decided to try one....on sale for $49.99 down from the usual $69.00. I haven't actually used it on a real project as yet , but have made a couple of test cuts and joints using the jig on some scraps and it works surprisingly well so far! Good points: (1) 4 different drilling positions for the pocket holes in different thickness of stock. (2) good quality, adjustable stock holding clamp (3) a...

First I want to express that the saw will be used for home repairs/remodels. I am not a woodworker by trade, so those in the professional business of woodworking may have a completely different opinion of this saw. The saw takes up a large area from front to rear. With the saw in the return position, the total distance from front to rear is 45 inches. There is nothing in the manual regarding the use of the laser guide. It appears that two items on the laser have been improved from the previous 12” s...

Sorry about the ratings I never know if 1 is best or 5 is best I just leave it alone. I'm not even sure it its for the author to rank the product or for the users to rank the review, since the ratings are available to both poster and subsequent responders.

If you don't use a marking gauge, they are very handy. I won't go into the use, other than to say its for precise marking of a line a user-selected distance from the edge of a board, for cuts, and for hole locations. I'll presume...

I asked my son about borrowing his Milwaukee impact wrench and he told me it had been stolen but gave him an idea. Almost 2 weeks ago he came over to help me install new floats under my dock with an early Christmas present. He bought me the Harbor Freight impact wrench, a spare battery, and a set of sockets. We then used it to remove 8 floats and install 10 in half a day. I have a 18V Ryobi impact driver but it puts out significantly less torque than the Harbor Freight wrench. Hot Rod magazine...

Got this for Christmas. So far I really like it. It is quite heavy and has both a 60 grit and a 120 grit wheel, both of which run very true. This thing is very quiet and, combined with my new "Blackhawk sharpening system" from Captain Eddie, does a very good job of sharpening my lathe chisels. I had been using a 6" Craftsman grinder running at 3500 rpm and the difference is night and day. The Rikon was only $99 at the time, although a local store now lists it at $149.

I needed a way to knock down floor leveling compound for my concrete patch and staining project, and I figured a disposable belt sander would be workable. I wanted to get a sander that shared belt size with my Ridgid EB4424. Upon unboxing and inspection, I found it to be much heavier than I felt the demo model at the store was. I plugged it in and took a test pass at some exceedingly high leveling / patch compound in my floor... I plugged it in, and pulled the trigger, watching the belt track...

Review of my used Shopsmith MK5 model 500


No Kool-Aid I owned a shop-full of pretty decent individual tools when I had the opportunity to buy a like-new Shopsmith MK5 for $250. Since I was looking at buying a Midi Lathe in this price range, it seemed like a good option. I am pleased with my purchase. I have noticed that some people have "drank the Kool-Aid" and are a bit scary in their enthusiasm for the tool (similar to some Mac/Linux users and Amway sellers I have known). ...

On a lark I bought this from HF for $14.39 (17.99 less a 20% off coupon), it's currently still $17.99.

http://www.harborfreight.com/air-too...0059-2156.html

I have a couple of cordless impact drivers, one 12V from B&D and the other a 19.2V Craftsman C3; keeping batteries is an expensive proposition. The advantages of an impact driver have been discussed before, notably driving high torque screws by impact rotation which is different than constant torque drill drivers...