Chisel recommendations?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts

  • cwsmith
    replied
    David,

    I too use the Narex chisels, purchasing mine from Lee-Valley. They are pretty decent quality, with very good hardwood handles and ferrules. Really decent size, well made blades and the handles are very comfortable in the hand to use. The Lee-Valley variety that I have are dark-handled and rather handsome (if that matters). To date I have six of the standard bevel-edged, a pair of skew's, and six of the mortise chisels. These were purchased as individual chisels, in the sizes that I would normally use. They do 'sets' but no sense in getting sizes that you may never need. http://www.leevalley.com/us/home/Search.aspx?action=n

    Back in 2003 (when I retired) I started updating my woodworking tools and at that time I purchase a four-piece set of Marples from Home Depot. At the time they were made in Sheffield, England and the steel was pretty good. They had blue plastic (high-impact) handles with steel caps. However, soon thereafter they started sourcing them from China and I've read a couple of reports (including one photo of a split chisel) that the steel is poor. While my particular set of Marples has held up, the steel has stained considerably (here in NY the humidity is ridiculous), despite being well oiled. My Narex chisels have not weathered at all.

    As far as sharpening is concerned, basically a well-made chisel will only require a bit of touch up. For that, I use a Veritas honing guide ( http://www.leevalley.com/US/wood/pag...72,43078,51868 )with wet/dry emory paper (3M auto-finish type) taped to a granite tile. A lot of the guys use this method ("Scary Sharp" ) using a piece of glass. For me, the granite tile is far more durable.

    If you want a less laborious sharpening method, a power sharpener is the way to go... but they can be considerably more expensive. Grizzly has a very nice wet sharpener for around $150. (http://www.grizzly.com/products/10-W...tion/T10010ANV ) The European manufacturer Tormac sells the same design for significantly more and it is very popular. There's also the "Worksharp" which has a fairly unique design and is probably faster than most sharpening methods. It sells for about $200 or so, depending on the retailer. (http://www.worksharptools.com/sharpe...er-ws3000.html)

    I hope this helps,

    CWS
    Last edited by cwsmith; 07-02-2015, 11:29 PM.

    Leave a comment:


  • David D
    replied
    Thank you for all the replies! I'll check out the sharpening links as well.

    Leave a comment:


  • twistsol
    replied
    Originally posted by David D
    Yeah, I tried sharpening the one chisel that I own, and messed it up. What's the best (easiest) sharpening system?
    Funny you should ask ...

    Sharpening-Woodworking-Chisels

    The method Sam describes in the article is the method I've used for years and it's fast, easy, and inexpensive and less messy than anything wet. I bought a kit at Rockler that has everything you need for $40.00 less a penny. Item number 25041

    Leave a comment:


  • atgcpaul
    replied
    When I started woodworking, I got a set of Irwin Marples chisels. They have served me well for nearly 15 years. When I got better, I bought a set of Japanese chisels. I reach for the Marples for heavy duty stuff and things like hinges and keep the Japanese chisels for cleaning up dovetails.

    http://www.amazon.com/Tools-Marples-...arples+chisels

    Beyond getting chisels, it's more important that you learn how to sharpen. I still use the scary sharp method--sandpaper on a glass plate--with an angle honing guide.

    http://www.amazon.com/Robert-Larson-...bxgy_469_img_y
    Last edited by atgcpaul; 07-02-2015, 09:13 PM.

    Leave a comment:


  • David D
    replied
    Yeah, I tried sharpening the one chisel that I own, and messed it up. What's the best (easiest) sharpening system?

    Leave a comment:


  • leehljp
    replied
    At the same time you are looking for chisels, look for a decent sharpening system.

    A sharp chisel is so much better than a "reasonably sharp" one.
    Last edited by leehljp; 07-02-2015, 09:00 PM.

    Leave a comment:


  • David D
    replied
    I saw the Narex chisels on Lee Valley and liked the price. Good to know you have a positive experience with them.

    Leave a comment:


  • jussi
    replied
    I really like my veritas PM-V11 but they are pretty spends especially if it's your first non-beater chisels. I initially got the Narex chisels and really like those. A lot of stores care them.

    Leave a comment:


  • David D
    started a topic Chisel recommendations?

    Chisel recommendations?

    I am learning that I need to start procuring some decent chisels, but man, you can spend some SERIOUS money on these things! I own ONE chisel right now (a 1" Stanley Contractor Grade), and would like to start buying some decent ones, but have no idea where to start.

    Any recommendations?
Working...