Decent, affordable planes?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jziegler
    Veteran Member
    • Aug 2005
    • 1149
    • Salem, NJ, USA.
    • Ryobi BT3100

    #16
    Originally posted by Knottscott
    One aspect of buying the older planes that I forgot to mention, is that they're worth roughly what you paid for them. Should you decide to resell them later, depending on what you paid, the "going rate" will be fairly stable...especially compared to a new plane.
    That seems true, but some of the new ones are pretty stable as well. Look at teh used prices on a LN or Veritas, and they are mostly just a very small discount over a new one. So the old planes and the high end new ones both hold their value well.

    Jim

    Comment

    • vaking
      Veteran Member
      • Apr 2005
      • 1428
      • Montclair, NJ, USA.
      • Ryobi BT3100-1

      #17
      My planes are very cheap. I have never had a LN or Veritas, so I cannot compare to $250 planes though. I have a new Stanley #4 from Lowes (about $40), a new Buck Brothers #5 from Home Depot (about same money), and an old Bailey #6 bought used on Ebay for under $40 too. The old Bailey is probably the best of the bunch with very little efforts to restore. But all of them cut wood as expected and make all the right sounds in the process and that is all I care about.
      Alex V

      Comment

      • LinuxRandal
        Veteran Member
        • Feb 2005
        • 4890
        • Independence, MO, USA.
        • bt3100

        #18
        Garage sales and flea markets are a good place to go. My mother is always at garage sales and I told her I was looking. She isn't good with specifics, so I told her what length (she knows what a plane is), and Stanley or Bedrock on it.
        I got a call to go meet her at a garage sale, and ended up with a Stanley #5, #7, and a Sargent made Craftsman, for $25 total. A few weeks later, she was going on a trip, and planned on hitting some of the craft stores and flea markets. I told her I was looking for a block plane, and said it was about 6 or 7 inches long. She came back and said my birthday present was on the table, then asked me if it was any good. She found a #65 for $7.

        Now, since I don't have anyone to show me how to tune them up locally, I did order a #4 (stanley) from Clint Jones. That way I had one done, to compare to.
        You don't have to hit the sales, just know someone who does.
        She couldn't tell the difference between the escape pod, and the bathroom. We had to go back for her.........................Twice.

        Comment

        • Pappy
          The Full Monte
          • Dec 2002
          • 10490
          • San Marcos, TX, USA.
          • BT3000 (x2)

          #19
          Another good source is estate sales/auctions. Straight estate sales you have to hit early since, like garage sales, tools go fast. At estate auctions a lot of the bidders are dealers more interested in furniture, period decorative items, etc. that they can turn over quickly. 'Collectible' hand tools tend to go low.
          Don, aka Pappy,

          Wise men talk because they have something to say,
          Fools because they have to say something.
          Plato

          Comment

          • dkerfoot
            Veteran Member
            • Mar 2004
            • 1094
            • Holland, Michigan
            • Craftsman 21829

            #20
            Sarge and I both reviewed Anant Kamal planes. Mine is the 2nd post. We had similar experiences in some ways and different in some. Since our mileage varied, yours probably will too...


            http://www.bt3central.com/showthread.php?t=38724
            Doug Kerfoot
            "Sacrificial fence? Aren't they all?"

            Smaller, Smarter Hardware Keyloggers
            "BT310" coupon code = 10% for forum members
            KeyLlama.com

            Comment

            • rnelson0
              Established Member
              • Feb 2008
              • 424
              • Midlothian, VA (Richmond)
              • Firestorm FS2500TS

              #21
              The garage sales seem to be a pretty good source.
              It took over a year, but I finally found a really nice old Stanley for $17 a few months ago. I still have some work to do to fully restore and tune it, but it worked great right after a sharpening.

              Comment

              • dbhost
                Slow and steady
                • Apr 2008
                • 9570
                • League City, Texas
                • Ryobi BT3100

                #22
                Originally posted by Pappy
                Another good source is estate sales/auctions. Straight estate sales you have to hit early since, like garage sales, tools go fast. At estate auctions a lot of the bidders are dealers more interested in furniture, period decorative items, etc. that they can turn over quickly. 'Collectible' hand tools tend to go low.
                You aren't kidding, I walked into one Saturday at 8:00 A.M. and a fellow was carrying out a box of planes, spokesheaves, chisels, and what looked like a bow saw... Nothing else of any interest to me was left...
                Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                Comment

                • pelligrini
                  Veteran Member
                  • Apr 2007
                  • 4217
                  • Fort Worth, TX
                  • Craftsman 21829

                  #23
                  The old planes are nice. You may have to spend a lot of time and effort to get them in working order, depending on the condition.

                  I spent quite a few hours this weekend on a Stanley-Bailey #3. I got it off of craigslist last month. Once I got all the nicks out of the blade, lapped & sharpened, then the surfaces cleaned & flattened it cut wonderfully.
                  Erik

                  Comment

                  • BigguyZ
                    Veteran Member
                    • Jul 2006
                    • 1818
                    • Minneapolis, MN
                    • Craftsman, older type w/ cast iron top

                    #24
                    Yeah, stores around here really markup the prices on old planes. I've found some "OK" deals, but nothing fantastic...

                    If I had more time, I'd try getting into going to garage sales, but honestly I have no idea how to effeciently track them down. Probably for the best at the moment, as I have to focus on finding a renter for my duplex these days.

                    Comment

                    • dbhost
                      Slow and steady
                      • Apr 2008
                      • 9570
                      • League City, Texas
                      • Ryobi BT3100

                      #25
                      FWIW, Craigslist has a pretty good listing of Garage sales. But honestly, Garage sales are popping up EVERYWHERE on nearly every weekend near me this year... Some good stuff going up too...
                      Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                      Comment

                      • BrazosJake
                        Veteran Member
                        • Nov 2003
                        • 1148
                        • Benbrook, TX.
                        • Emerson-built Craftsman

                        #26
                        Originally posted by Len
                        You could find yourself a hunk of maple or beech, get a L-N blade, and make your own.

                        Len
                        Ditto, except go to Hock Tools and order one the Krenov iron & chipbreaker. For $50 + some scrap wood and sweat equity, cuts better than any of my old Baileys. I think Craftsman Studio sells them at a slight discount. The iron is a beefy 3/16" thick.

                        Comment

                        • rnelson0
                          Established Member
                          • Feb 2008
                          • 424
                          • Midlothian, VA (Richmond)
                          • Firestorm FS2500TS

                          #27
                          If I had more time, I'd try getting into going to garage sales, but honestly I have no idea how to effeciently track them down. Probably for the best at the moment, as I have to focus on finding a renter for my duplex these days.
                          I just drive to the grocery store and hit any that crop up on the way. If I know I will have time, I check out craigslist or the local papers for neighborhood sales or individual sales that specifically list tools that I care about.

                          Oh, once you find a plane, I found this guide to restoring it: http://foldingrule.blogspot.com/2007...t-removal.html (parts 2 and 3 in the list on the right)

                          Comment

                          • BrazosJake
                            Veteran Member
                            • Nov 2003
                            • 1148
                            • Benbrook, TX.
                            • Emerson-built Craftsman

                            #28
                            I haven't studied how to do it yet, but there is a way to get an RSS or other automated feed from CL.

                            I'm in a bind because with a kid in college and one in private school, I have neither the money for the fine hand planes, nor the time to look for rust to restore, so I've found making my own woodies the best compromise. Also, I'm in TX (North Central), which is **** for old WW tools, except maybe down in the German Hill Country, where Pappy seems to sweep the countryside clean of all rust:-)

                            The only efficient ways I've found to shop for vintage hand tools is Ebay, or, Walt Quadrato at Brass City Records (just google the name). Walt is awesome. You pay a bit more for his stuff, but you know it's good (or he'll tell you what it needs), and he's still WAY less than most vintage tool dealers on the net, plus he's a wealth of knowledge and will take time to share it with you.

                            Comment

                            • sscherin
                              Senior Member
                              • Dec 2003
                              • 772
                              • Kennewick, WA, USA.

                              #29
                              I know some of the plane gurus won't like it but I've been happy with my 2004 vintage Stanley No. 5 I got from Rockler..

                              I took it home.. flattened the sole. scary sharpened the iron and went to town with it..
                              Maybe I just got lucky or I don't have a clue what "Good" is

                              Yes I tuned up an old Tradseman plane too.. It gets tons of use.


                              Now when I get this Type 17 No 5 tuned up I'll have something to compare it too.

                              William's Law--
                              There is no mechanical problem so difficult that it
                              cannot be solved by brute strength and ignorance.

                              Comment

                              Working...