Anyone ever build a drum sander?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Nil
    Forum Newbie
    • Nov 2007
    • 49

    #16
    I know this is an old thread...

    Has anyone ever tried building a drum sander by taking apart a BT3, flipping it upside down, mounting the drum where the saw blade would be, and using the elevation adjustment to adjust the depth of each pass?

    Comment

    • dbhost
      Slow and steady
      • Apr 2008
      • 9570
      • League City, Texas
      • Ryobi BT3100

      #17
      Originally posted by TV
      I actually just finished putting mine together this morning...

      Like many, it is based on the shopnotes plan, but with a bunch of modifications to use parts I could scrounge up (flange bearings, C Frame Motor, etc.) and to include it's own motor rather than mounting on the tablesaw. I also made it a little wider and the platten a little longer than the plan called out. I kept it small overall so it could be set up on a bench because I just don't have a lot of room in my shop. The pictures tell the story, let me know if you have any questions!
      All I want to know is when are you going to deliver it to my shop? That thing looks great!

      Nil, I haven't seen that done, but it sounds like an interesting idea...
      Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

      Comment

      • charliex
        Senior Member
        • Mar 2004
        • 632
        • Spring Valley, MN, USA.
        • Sears equivelent BT3100-1

        #18
        My 2 cents worth

        I was going to build my own, even started work on a Sand Flee type. I wanted wider than 18 inches and while the Sand Flee has that capability it is more of a finish sander than a material remover but it will sand very thick (tall) pieces. The Jet on the other hand will do faster material removal but is limited to a max of 3" thick material. It also is a much heaver built machine which means it will handle larger/heaver work pieces. Long story short I went with the Jet 16-32. I'm glad I did because my first project for it was a 30" wide 4' long 7/8 " thick table top.
        While waiting for the Jet to be delivered I was designing (imagining) a top that would give me the advantages of the Sand Flee but on steroids. The real bonus came several weeks later when my next door neighbor set their old computer desk on the curb. His wife was coming out of the house with the free sign as I was carting it away. So for the price of the Jet 16-32 plus a few hours in the shop (no cost there),about 18 screws, 4 dowels and a little glue I have both an under and over drum sander. The change over takes about a minute and a half and only requires the removal / replacement of the top of the 16-32.
        Late last night I flush sanded the fingers on some box joints. 3/8" material with 3/8" fingers on a large Kleenex box size box (ok it's a pine box to put a large Kleenex box into). Using 80 grit, pitch clogged paper took about 2 minutes to get everything nice and flush. I haven't used it for any finish sanding yet ( 120 or finer grit) but indicators are it should work just fine.

        Chas
        Attached Files

        Comment

        Working...