I have really enjoyed my BT3100, but it is time for something a little beefier and will hold its accuracy better. I am really at a crossroads though. I really like the Grizzly line of saws as well as the Ridgid TS3560.
Space is not a factor. 220V is already installed. I would like to spend less than 1000 but willing to spend above if necessary.
I used a friends JET supersawhttp://tinyurl.com/yddk9s and loved how quiet it was compared to the BT3100.
What would I gain by going to the G1023 cabinet saw or any cabinet saw for that matter, rather than going with a contractor saw such as the G0444Z or the Ridgid TS3650?
The TS3560 may be out if it does not acceppt aftermarket rails and fences.
Are the noise levels different on any of these saws.
Thanks for your help!
Space is not a factor. 220V is already installed. I would like to spend less than 1000 but willing to spend above if necessary.
I used a friends JET supersawhttp://tinyurl.com/yddk9s and loved how quiet it was compared to the BT3100.
What would I gain by going to the G1023 cabinet saw or any cabinet saw for that matter, rather than going with a contractor saw such as the G0444Z or the Ridgid TS3650?
The TS3560 may be out if it does not acceppt aftermarket rails and fences.
Are the noise levels different on any of these saws.
Thanks for your help!
Comment