is the wynn cartridge filter the standard for upgrading the bags. they are around a $100 with 1 micron filtration. thanks frank
hf dust collector upgrade
Collapse
This topic is closed.
X
X
-
Tags: None
-
It is one of a number of posible conversions. There are actually 2 different cartridges available from Wynn that fit the HF 2hp DC. Other possible upgrades are bags with better filtering capabilities. I personally have the Wynn Paper/polyester conversion and am very happy with its performance. The other Wynn cartridge is a washable spun polyester but it's filtering performance is not quite as good. -
it has a stadard 20" rim size. so there are many options, all of which upgrade the rather porous 30 micron bags.
wynn has two filters they selll to sit atop the HF DC.
Also Grizzly, PSI, and Jet sell replacement canisters with beater bars for the same purpose, the beater bars help clear the filter of fine dust, dropping it into the bags below.
Also Grizz and others sell filter bags that have 5 or 0.5 micron cuts.Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
-
HF now sells a canister filter for their 2hp dust collector. Its not cheap but at least you know it will fit without having to tweak it.
________
Vaporizer WikiLast edited by newbie2wood; 09-15-2011, 05:13 AM.Comment
-
Originally posted by newbie2woodHF now sells a canister filter for their 2hp dust collector. Its not cheap but at least you know it will fit without having to tweak it.Comment
-
Where? Help?
Originally posted by newbie2woodHF now sells a canister filter for their 2hp dust collector. Its not cheap but at least you know it will fit without having to tweak it.
I'm looking for a canister for my HF. The Wynn filters are intriguing, but I'd rather have one with the beater bar/paddles. The JDS is no longer available at Amazon, and I'm not familiar at all with the Jets.Two wrongs do not make a right, but three rights do make a left.Comment
-
Originally posted by newbie2woodHF now sells a canister filter for their 2hp dust collector. Its not cheap but at least you know it will fit without having to tweak it.
JRJRComment
-
Originally posted by wwday3I looked online and could not find it. Did you see it in a store?
I'm looking for a canister for my HF. The Wynn filters are intriguing, but I'd rather have one with the beater bar/paddles. The JDS is no longer available at Amazon, and I'm not familiar at all with the Jets.
http://www.grizzly.com/products/H5783
also available thru amazon i think.
Amazon also carries the Jet caniter upgrades but they include HW you don't need.Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
-
-
Originally posted by newbie2wood
I have a HFDC with the Wynn filter, if this had been available when I purchased I would have bought this instead of the Wynn just to have the beater.
ScottComment
-
Found this page online a HOW TO CONVERT HF DC to Canister, not sure how well it'd work, but thought it might be useful. If anyone can recommend or warn against this article, please do. I do not make any representations.
http://www.msu.edu/user/olsonbr2/HFDC/HF-DC.htmNever met a bargain I didn't like.Comment
Footer Ad
Collapse
Comment