I recently routed some rabbits in the edges of the tops of two coffee tables and of course what a mess. I had the DC 4" hooked up to a "Big Gulp" and positioned as well as I could and the air cleaner on high but still had lots of stuff flying around.
In the recent Rockler flyer there was a "Edge Routing Dust Port" (P/N 24991) which looks like it might be effective but it only seems to work with a top bearing style bit. For the tables I had to use an edge guide (the PC 42690).
Does anyone have experience with the Rockler item or have any other good suggestions to handle edge routing dust collection situations.
FYI, I couldn't to this on the router table...tops were too big.
In the recent Rockler flyer there was a "Edge Routing Dust Port" (P/N 24991) which looks like it might be effective but it only seems to work with a top bearing style bit. For the tables I had to use an edge guide (the PC 42690).
Does anyone have experience with the Rockler item or have any other good suggestions to handle edge routing dust collection situations.
FYI, I couldn't to this on the router table...tops were too big.
Comment