I've almost got it done. All that is lacking is a drawer and some base trim.
Windows Media clip in free spin action
Windows Media clip with planer
Gallery photos of construction
I designed and built it to use materials I had on hand, save for the casters & pins. The materials are maple (recycled flooring strips), 2x4 3/4 birch ply, a 2x4 lowes handi ply (whatever it is), 2x4 1/2" birch ply, a couple pieces of 3/4" red oak, pine 3/4" ply bottom, pine 1x4s, 1/2" steel rod, Woodcraft 3" double locking casters, 1/8" thick nylon washers, two hitch pins, a bunch of Tightbond III, and some waterbased poly.
I intended on laminating another piece of 1/2" birch ply to the 3/4" handi ply sides. After I got the hardwood sides and top rails glued on it seemed pretty stable without the additional 1/2" sides. Most all the joints are dados or rabbits. I used some 1-1/4" lag bolts to fasten the casters.
AutoCAD drawings (dwg2007 format)
Plans in PDF format
.
Windows Media clip in free spin action
Windows Media clip with planer
Gallery photos of construction
I designed and built it to use materials I had on hand, save for the casters & pins. The materials are maple (recycled flooring strips), 2x4 3/4 birch ply, a 2x4 lowes handi ply (whatever it is), 2x4 1/2" birch ply, a couple pieces of 3/4" red oak, pine 3/4" ply bottom, pine 1x4s, 1/2" steel rod, Woodcraft 3" double locking casters, 1/8" thick nylon washers, two hitch pins, a bunch of Tightbond III, and some waterbased poly.
I intended on laminating another piece of 1/2" birch ply to the 3/4" handi ply sides. After I got the hardwood sides and top rails glued on it seemed pretty stable without the additional 1/2" sides. Most all the joints are dados or rabbits. I used some 1-1/4" lag bolts to fasten the casters.
AutoCAD drawings (dwg2007 format)
Plans in PDF format
.
Comment