My kitchen cabinets are a frightful mess and I am refinishing them. I don't particularly want to sand them down for fear of messing up the profiles and details, so I am trying to strip the urethane and stain using Citrustrip but the process is going sloooooooooooow....
Just wondering if there are any pointers anyone can give me on this...
I already did one door, a test piece and basically was able to use a dampened steel wool pad to scrub off most of the softened stain / urethane gunk, but some remained, so on went another coat of stripper...
Hopefully I can get these doors done tomorrow so that I can get them restained, urethaned, and remounted...
FWIW, I will be just sanding down the face frames. No fancy profiles, sander should make quick work of the stuff...
Just wondering if there are any pointers anyone can give me on this...
I already did one door, a test piece and basically was able to use a dampened steel wool pad to scrub off most of the softened stain / urethane gunk, but some remained, so on went another coat of stripper...
Hopefully I can get these doors done tomorrow so that I can get them restained, urethaned, and remounted...
FWIW, I will be just sanding down the face frames. No fancy profiles, sander should make quick work of the stuff...
Comment