Trellis

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 21981
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #1

    Trellis

    Wife wanted one of these:
    ( I was just going to frame some lattice when she pointed to this at Lowes and said she wanted something like it


    She wanted one a bit wider to go behind a existing planter box.
    Doing the curves was tough.



    Too much math guessing at all the dimensions and making the slats come out evenly, but in the end:



    It was hot and humid and the US Open tennis matches were on so I did some glue-ups, watched some tennis, and went back and forth.
    Last edited by LCHIEN; 09-01-2008, 09:56 PM.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions
  • pelligrini
    Veteran Member
    • Apr 2007
    • 4217
    • Fort Worth, TX
    • Craftsman 21829

    #2
    That looks a whole lot better than lattice. How did you fasten the slats, just glue?
    Erik

    Comment

    • MikeMcCoy
      Senior Member
      • Nov 2004
      • 790
      • Moncks Corner, SC, USA.
      • Delta Contractor Saw

      #3
      So was that your waiting on a hurricane project? Either way, the finished product looks like it probably satisfied the better half.

      Comment

      • LCHIEN
        Super Moderator
        • Dec 2002
        • 21981
        • Katy, TX, USA.
        • BT3000 vintage 1999

        #4
        Originally posted by pelligrini
        That looks a whole lot better than lattice. How did you fasten the slats, just glue?
        The frame is doubled-thickness material (Cedar).
        I rabetted in essence by using a skinnier piece on the back of the verticals. The ends of the horizontals are sitting in the rabbet in the back plane. Glued and brad nailed to the frame.
        The Verticals are laid over the horizontals so are even with the front plane of the frame. Each intersection was given a dab of Glue and a brad nail.

        the frame is 2.5" wide, the rails are 3/4". Must have used 6-7 cedar picket fence boards. Making the arch was a key feature but did consume a high percentage of the thought that went into this thing.
        Loring in Katy, TX USA
        If your only tool is a hammer, you tend to treat all problems as if they were nails.
        BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

        Comment

        • LCHIEN
          Super Moderator
          • Dec 2002
          • 21981
          • Katy, TX, USA.
          • BT3000 vintage 1999

          #5
          Originally posted by MikeMcCoy
          So was that your waiting on a hurricane project? Either way, the finished product looks like it probably satisfied the better half.
          while i was building this i caught all kinds of crap from the BH... its too wide, the slats are too thick, its too heavy, do you know what you are doing, etc. When it was done she said she liked it.
          Loring in Katy, TX USA
          If your only tool is a hammer, you tend to treat all problems as if they were nails.
          BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

          Comment

          • cabinetman
            Gone but not Forgotten RIP
            • Jun 2006
            • 15216
            • So. Florida
            • Delta

            #6
            It looks great. I like the scale. Looks more stable with the added width. Did you put any finish on it?
            .

            Comment

            • shoottx
              Veteran Member
              • May 2008
              • 1240
              • Plano, Texas
              • BT3000

              #7
              Very Cool
              Often in error - Never in doubt

              Mike

              Comment

              • cgallery
                Veteran Member
                • Sep 2004
                • 4503
                • Milwaukee, WI
                • BT3K

                #8
                Originally posted by LCHIEN
                while i was building this i caught all kinds of crap from the BH... its too wide, the slats are too thick, its too heavy, do you know what you are doing, etc. When it was done she said she liked it.
                Looks fantastic. In fact, I'm truly impressed by the resemblance to the prototype (store version). And I'm sure the quality of construction is superior, as well.

                Still I think it is funny that she was giving you grief during the construction phase. You may want to return the favor next time she is cooking an elaborate dish, I'm sure she will appreciate it.

                Comment

                • dbhost
                  Slow and steady
                  • Apr 2008
                  • 9503
                  • League City, Texas
                  • Ryobi BT3100

                  #9
                  Originally posted by cgallery
                  Looks fantastic. In fact, I'm truly impressed by the resemblance to the prototype (store version). And I'm sure the quality of construction is superior, as well.

                  Still I think it is funny that she was giving you grief during the construction phase. You may want to return the favor next time she is cooking an elaborate dish, I'm sure she will appreciate it.
                  And afterwards I am pretty sure more than a few of us can recommend a good divorce lawyer!
                  Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                  Comment

                  • LCHIEN
                    Super Moderator
                    • Dec 2002
                    • 21981
                    • Katy, TX, USA.
                    • BT3000 vintage 1999

                    #10
                    Originally posted by cabinetman
                    It looks great. I like the scale. Looks more stable with the added width. Did you put any finish on it?
                    .
                    just left the cedar as is, no maintenance... should last 10 years.
                    I think the frame is a bit wider than the original, looking at the pics, but i think that is probably a good choice given that the unit is a bit wider, the balance is the same. I picked it based on what I thought would look proportional.
                    Loring in Katy, TX USA
                    If your only tool is a hammer, you tend to treat all problems as if they were nails.
                    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

                    Comment

                    • dbhost
                      Slow and steady
                      • Apr 2008
                      • 9503
                      • League City, Texas
                      • Ryobi BT3100

                      #11
                      Just out of curiosity, where were you able to pick up cedar? I have some outdoor projects on my to do list...
                      Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                      Comment

                      • LCHIEN
                        Super Moderator
                        • Dec 2002
                        • 21981
                        • Katy, TX, USA.
                        • BT3000 vintage 1999

                        #12
                        Originally posted by dbhost
                        Just out of curiosity, where were you able to pick up cedar? I have some outdoor projects on my to do list...
                        I just go to lowes or HD. THe WRC for fence pickets used to be $2 but its now up to $2.69. Not the best cedar but OK for outdoor projects and sometimes you have to work around the bad knots.

                        When they have a new load I usually pick up a few boards that are more clear and desirable for woodworking. When they are down to a few boards, there won't be anything worth picking. I probably keep a half dozen or so around for outdoor projects.
                        Nominally 1x6 x 6' they are usually 5/8" x 5.5" x 72" but the tops are 1" dog-ear chamfered so you can lose an inch.
                        They're rough cut but I like that look for outdoor stuff.

                        They also have some cedar in the hardwood lumber aisle (as opposed to the construction lumber aisle) but that generally costs a lot more. Longer and thicker boards can be found there.
                        Loring in Katy, TX USA
                        If your only tool is a hammer, you tend to treat all problems as if they were nails.
                        BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

                        Comment

                        • dbhost
                          Slow and steady
                          • Apr 2008
                          • 9503
                          • League City, Texas
                          • Ryobi BT3100

                          #13
                          Now THERE is a good idea..

                          I never thought of using fence pickets... Those are easy to get down here...
                          Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                          Comment

                          • gad5264
                            Veteran Member
                            • Aug 2005
                            • 1407
                            • Columbus, Ohio, USA
                            • BT3000/BT3100NIB

                            #14
                            Loring that is really nice. You have just given me an idea to cover up my AC unit in the back yard.
                            Grant
                            "GO Buckeyes"

                            My projects: http://community.webshots.com/user/gad5264

                            Comment

                            Working...