Hi all, Just joined this forum. I have had my BT3 since working for Ryobi back in 92' when the saw was sold into Home depot. I started a small woodworking business and decided it was time to upgrade to an old school Craftsman or Delta saw. I bought a Craftsman for $250 and after setting it up, I decided I didn't like the size, the feel or the mess (no dust collection) I then decided to see if I could refresh my BT3 and was surprised at the amount of parts that are still floating around (the most needed are impossible to find) my main problem was that my fence wouldnt lock on the top side and that was due to a worn ecentric roller handle holder. There is a custome made unit on ebay, but its $38 and that seems high so I bought a used saw and parted it out. I found some stuff on Ebay, toolparts direct and eReplacement parts. Is there anywhere else to find parts? After buying the saw, I found that I did indeed have another rip fence in my shed so I have 3 in all and trying to get them all working. I will be selling at least 1 and a T slot for standard miter fences and have no idea how to price either one as there are none for sale? Thought? Thanks!
Parts..parts... parts
Collapse
This topic is closed.
X
X
-
Tags: None
-
Getting some parts is hard to do now, except when someone decides to part one out, which is about once every 5 to 6 months now. I have a custom made (aluminum) fence end and it works well. It was expensive but it works well.Hank Lee
Experience is what you get when you don't get what you wanted! -
A custom made fence....wow that must be nice. I have a friend that designs jeep parts and he told me to send him parts that need replicating like the roller and he would see what he can do. If I thought there was a need I would have him make more....its hard to tell if the remaining BT3 owners are almost a dying breed or will continue on. Heck i was surprised to even find this forum,,,Comment
-
A custom made fence....wow that must be nice. I have a friend that designs jeep parts and he told me to send him parts that need replicating like the roller and he would see what he can do. If I thought there was a need I would have him make more....its hard to tell if the remaining BT3 owners are almost a dying breed or will continue on. Heck i was surprised to even find this forum,,,
Hank Lee
Experience is what you get when you don't get what you wanted!Comment
-
Actually that is the fence END block that holds the roller and lock.
https://www.ebay.com/itm/Ryobi-BT300...gAAOSwCx5bKm88Comment
-
There were allegedly more than 100,000 BT3s made and sold of the various incarnations (BT3100, BT3000 and the various Sears versions. So I reckon there's a lot of parts sitting out there somewhere.
I replaced the rear block of my rip fence with one of the aftermarket machined ones so it will never break again. I have a plastic one that still has life if someone needs one.Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
Footer Ad
Collapse
Comment