Okay here's the scoop. A week after the electrical work, the dryer quit heating. So here's what I have checked so far, and I am STUMPED...
#1. 220V from the socket side to side. 110V per leg.
#2. Thermal fuse, hi limit fuse, and both thermostats tested good.
#3. Heating element tested good.
#4. Jumpers / Connectors tested good.
#5. Wiring junction where the cable comes into the dryer checked out good.
#6. plug / cable checked out good.
So what the heck can it possibly be?
#1. 220V from the socket side to side. 110V per leg.
#2. Thermal fuse, hi limit fuse, and both thermostats tested good.
#3. Heating element tested good.
#4. Jumpers / Connectors tested good.
#5. Wiring junction where the cable comes into the dryer checked out good.
#6. plug / cable checked out good.
So what the heck can it possibly be?
Comment