Hi I assumed 21829 has a think kerf blade?
I measure the width of the blade teeth is around .107 which should be 7/64? Even if it is a ATB, each teeth should aligned, right?
I also measure the kerf (real cut) width, it is about .115 or 120. (forgot which one)
Does that mean my blade has some wobbling? Is that within tolerance?
How width is your kerf?
Thanks.
I measure the width of the blade teeth is around .107 which should be 7/64? Even if it is a ATB, each teeth should aligned, right?
I also measure the kerf (real cut) width, it is about .115 or 120. (forgot which one)
Does that mean my blade has some wobbling? Is that within tolerance?
How width is your kerf?
Thanks.
Comment