Since the grandson is home for the summer and probably a while into the semester, I invited him over for a woodworking projects with our masks on for both isolation and dust protection.
He marked the lengths of the cuts. Operated the miter saw.
lowered the drill press quill to cut the holes.
I positioned the saw and drill prior to his operating.
I did the assembly and gluing and the brad nailing.
He assembled and screwed the bottom and
I hit the letter punches with the hammer.
He's 9 years old.
Chickadee nest house plans found online.
You're supposed to use a 6" BOARD CUT FROM A 1X12, BUT i CHEATED AND USED A 1X6 CEDAR FENCE PICKET WHICH IS ONLY 5.5 INCHES WIDE.
He marked the lengths of the cuts. Operated the miter saw.
lowered the drill press quill to cut the holes.
I positioned the saw and drill prior to his operating.
I did the assembly and gluing and the brad nailing.
He assembled and screwed the bottom and
I hit the letter punches with the hammer.
He's 9 years old.
Chickadee nest house plans found online.
You're supposed to use a 6" BOARD CUT FROM A 1X12, BUT i CHEATED AND USED A 1X6 CEDAR FENCE PICKET WHICH IS ONLY 5.5 INCHES WIDE.
Comment