Band Saw Boxes
Collapse
This topic is closed.
X
X
-
Band Saw Boxes
Jon
Phoenix AZ - It's a dry heat
________________________________
We all make mistakes and I should know I've made enough of them
techzibits.comTags: None -
Nice work. Looks great. I'm going to have to try some one day. I cut some old limb wood off my oak tree a a couple of years back and sealed the ends. It should be fully dry by now.
Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions -
nice!!!!!!!!Last edited by BadeMillsap; 12-01-2016, 11:59 AM."Like an old desperado, I paint the town beige ..." REK
Bade Millsap
Bulverde, Texas
=> Bade's Personal Web Log
=> Bade's Lutherie Web LogComment
-
The basic construction is pretty straightforward although there is a lot of sanding of awkward shapes and curves. You will find you need every sanding tool and trick in your arsenal ;-)
Jon
Phoenix AZ - It's a dry heat
________________________________
We all make mistakes and I should know I've made enough of them
techzibits.comComment
-
-
Seriously there are cut lines where I went in one side for the top draw and the other for the lower. They were then glued back together and as this is done before any shaping or sanding they do get hidden prety well. They are still visible but you have to know to look for them and where. You can hide them in the grain on the front but its harder to do on the sides.Jon
Phoenix AZ - It's a dry heat
________________________________
We all make mistakes and I should know I've made enough of them
techzibits.comComment
Footer Ad
Collapse
Comment