Hello,
I purchased a new to me bt3k that didn't have the blade guard. I ended up purchasing two new ones from ryobi.
When I installed it I noticed the riving knife/splitter was about 10 degrees out from the blade. Enough to be unable to pass a 3/4" plywood piece without it shifting away from the rip fence. I removed all the shims and checked the shims/bolts/mount. The bolts have a ton of play, and the riving knife was tilted the same without shims.
Blade is at 90 btw
Any ideas?
Thanks
I purchased a new to me bt3k that didn't have the blade guard. I ended up purchasing two new ones from ryobi.
When I installed it I noticed the riving knife/splitter was about 10 degrees out from the blade. Enough to be unable to pass a 3/4" plywood piece without it shifting away from the rip fence. I removed all the shims and checked the shims/bolts/mount. The bolts have a ton of play, and the riving knife was tilted the same without shims.
Blade is at 90 btw
Any ideas?
Thanks
Comment