Jet Cabinet Saw $753.97 - 3hp Xacta Fence

[Jeffrey Schronce]

JET 708713XK JTAS-10-30 10-Inch Right Tilt 3 Horsepower Cabinet Saw with 30-Inch Xacta II Fence, and 2 Cast Iron Extension Wings, 230-Volt 1 Phase

$753.97 + $149.00 Shipping.

1 left in stock, though they may backorder. This is a killer deal on an excellent saw!


http://www.amazon.com/dp/product/B00...SIN=B00064NGUQ

[Woodwerker]

Jeff, my wife is gonna murder you
I got it, I had no choice.
I gotta sell the Jet we both got at Lowes.
What do you think I could get for it?
Good Condition?
Thanks for posting this steal!!!!
Joe

[Jeffrey Schronce]

Jeff, my wife is gonna murder you
I got it, I had no choice.
My I gotta sell the Jet we both got at Lowes.
What do you think I could get for it?
Good Condition?
Thanks for posting this steal!!!!
Joe

I sold mine on ebay and got a crazy amount for it! I had built in a right wind router table with an Excalibur router plate (not lift but it does tilt up for adjustments about table). I got over $600 for it!

I noticed that folks selling those saws got very little when boxed up, but commanded higher prices of "used" equipment that was set up.

After bogging down my 22124 I am itching to do the same!

[Jeffrey Schronce]

It appears the deal continues, showing shipping date of 2-3 days. Also forgot to mention free Freud blade with any saw over $300 from Amazon.

[LarryG]

Wow, what a great deal ... isn't the normal price on this one something like ~$1300?

Potential buyers, note that it requires a 240V circuit.

[Jeffrey Schronce]

Wow, what a great deal ... isn't the normal price on this one something like ~$1300?

Potential buyers, note that it requires a 240V circuit.

$1300 correct!

240v correct! (though if you want to swap it for my 1.75 HP 110V from my 22124 I'd be all about that!)

[Woodwerker]

How do I get the free blade??

[Jeffrey Schronce]

How do I get the free blade??

It was in middle of the page.

Receive 1 Freud LU84R011 10" Saw Blade free for every 1 10-inch table saws priced over $300 you purchase offered by Amazon.com.

[Woodwerker]

It was in middle of the page.

Receive 1 Freud LU84R011 10" Saw Blade free for every 1 10-inch table saws priced over $300 you purchase offered by Amazon.com.

Thanks Jeff, I went so fast I missed that.
I sent an email will see what happens

[davidtu]

OK tell me guys, I haven't done any research yet on cabinet saws... I have a longterm (1 yr) plan to build a shop at my house and plan to upgrade my BT3 for a cabinet saw.

Now, if I let this pass, will I regret it? In other words, how KILLER is killer?

How does this compare to other cabinet saws?

Thanks!

[Woodwerker]

OK tell me guys, I haven't done any research yet on cabinet saws... I have a longterm (1 yr) plan to build a shop at my house and plan to upgrade my BT3 for a cabinet saw.

Now, if I let this pass, will I regret it? In other words, how KILLER is killer?

How does this compare to other cabinet saws?

Thanks!

It is a GREAT deal, not good GREAT

[Jeffrey Schronce]

OK tell me guys, I haven't done any research yet on cabinet saws... I have a longterm (1 yr) plan to build a shop at my house and plan to upgrade my BT3 for a cabinet saw.

Now, if I let this pass, will I regret it? In other words, how KILLER is killer?

How does this compare to other cabinet saws?

Thanks!

It is a great deal on this saw. This saw is equiv to Uni. If you are waiting until you build a shop you will likely run across one or two equal deals but not better deals IMHO. Amazon has sold Uni w/o fence for $699 and with fence for $799 this year. They were very, very limited quanitites and once they were gone they were gone. There was a dealer blowing out these jets for $999 + shipping and a TON of folks on Sawmillcreek and Woodnet bought them and love them. THis is a better deal.

As a point of comparision and equal Grizzlyt would cost more delivered than this saw.

[davidtu]

Happy Birthday, I just bought myself a new saw!

Jeffrey, do you have any extra room at your place... not for the saw... for me to hide from LOML!

[LarryG]

In other words, how KILLER is killer?

As noted up the page, this one normally retails for around $1300. So this is pretty killer.

The one factor you might consider is that it has a 30" fence system, rather than a 50". If you're going to get a cabinet saw, and plan the construction of a new shop around it, you'll want the larger 50" rip capacity. At the time you buy a cabinet saw, that's usually only a $100-200 upgrade from a 30". Later, it'll cost you quite a bit more (not sure how much more). Technically, the fence itself can be retained; you'll only need the longer rails. Alternatively, you could sell the entire 30" system and recoup part of the cost of the 50" system.

Another factor is that you might have room for this 30" saw NOW, in your current shop. It also might take you longer than a year to get your new one built. (One year is LONG TERM?!? Heck, it takes me at least a year to figure out what my plan is, let along actually execute that plan. )

[bluzcat]

Thanks for the heads up Jeffery. I had been going back and forth trying to make up my mind on which version of the Grizzly 1023 to buy. This is a killer deal. $900 for for a 3hp cabinet saw! That's less than 1-3/4hp "Intermediate Saw". Now I have about a week to come up with an explanation for LOML why I couldn't pass this up! Thanks again.