Hydraulic Oil

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jackellis
    Veteran Member
    • Nov 2003
    • 2638
    • Tahoe City, CA, USA.
    • BT3100

    #1

    Hydraulic Oil

    I have a Ryobi electric log splitter. It's perfect for soft woods like pine and fir that we have in abundance, it doesn't require storing gasoline, and a I can move it to where the wood is relatively easily. However...

    ...the ram quit moving just as I was finishing up last year's splitting chores. Finally figured out which parts to remove and clean, and got an oil shower in the process. Now I need a gallon or so of 22 viscosity hydraulic oil. I dont have a need, a budget or room for a 55 gallon drum.

    Where's the best place to buy something like this retail? 45 minutes of Google searching wasn't terribly helpful.
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 21886
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    I'd consider going to an auto parts store and asking for 22 Viscosity Hydraulic oil and see what they say.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • cabinetman
      Gone but not Forgotten RIP
      • Jun 2006
      • 15216
      • So. Florida
      • Delta

      #3
      You might also check with some lawn mower stores, many commercial machines have hydraulic systems.

      .

      Comment

      • pelligrini
        Veteran Member
        • Apr 2007
        • 4217
        • Fort Worth, TX
        • Craftsman 21829

        #4
        I know the auto part stores around me carry gallon containers of AW32 Hydraulic Fluid for about $10, not sure about the 22. You shouldn't have a problem finding it.
        Erik

        Comment

        • LCHIEN
          Super Moderator
          • Dec 2002
          • 21886
          • Katy, TX, USA.
          • BT3000 vintage 1999

          #5
          if not Auto supply houses, then try a Tractor Supply, or Graingers.
          Loring in Katy, TX USA
          If your only tool is a hammer, you tend to treat all problems as if they were nails.
          BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

          Comment

          • Skaning
            Forum Newbie
            • Nov 2010
            • 63

            #6
            22 is an ISO Viscosity grade and is a pretty light oil. I suspect it's probably not available in less than gallons if that. I don't think I've ever seen hydraulic oil in farm supply stores or autos supply stores in less than 5 gallons, but then that's what I've needed for my equipment. Your best bet, I think, would be a service shop that specializes in hydraulic repairs and try to talk them into selling you what you need from their bulk supply.

            Comment

            • cabinetman
              Gone but not Forgotten RIP
              • Jun 2006
              • 15216
              • So. Florida
              • Delta

              #7
              This may be a shot in the dark, but Sears may have it.

              .

              Comment

              • eezlock
                Senior Member
                • Feb 2006
                • 997
                • Charlotte,N.C.
                • BT3100

                #8
                hydraulic oil

                Harbor freight has hydraulic oil in stock on sale. A 15 ounce container, $3.99
                # 20 weight oil. Probably cheaper than anywhere else.

                Comment

                • dbhost
                  Slow and steady
                  • Apr 2008
                  • 9481
                  • League City, Texas
                  • Ryobi BT3100

                  #9
                  22wt hydraulic oil is a bit of an odd specification. I see a lot of 20wt like what they use for floor jacks and such. Typically comes in quart bottles sold at Auto Zone and Advance Auto...
                  Please like and subscribe to my YouTube channel. Please check out and subscribe to my Workshop Blog.

                  Comment

                  • herb fellows
                    Veteran Member
                    • Apr 2007
                    • 1867
                    • New York City
                    • bt3100

                    #10
                    I second Grainger. It seems that they always have that difficult to find item, albeit at an inflated price.
                    You don't need a parachute to skydive, you only need a parachute to skydive twice.

                    Comment

                    • Tom Slick
                      Veteran Member
                      • May 2005
                      • 2913
                      • Paso Robles, Calif, USA.
                      • sears BT3 clone

                      #11
                      ISO 22 "hydraulic oil" is often called "spindle oil", "turbine oil", or "machine oil". Mcmaster-Carr P/N 3025K21 is about $17 for a gallon

                      I'd use Automatic transmission fluid. It's a light hydraulic fluid and often spec'd in hydraulic systems. It does have a slightly higher viscosity than ISO 22.
                      Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

                      Comment

                      • knotley
                        Established Member
                        • Apr 2003
                        • 126
                        • Canada.

                        #12
                        I had the same problem a few years back:

                        http://www.hearth.com/econtent/index...wthread/40381/

                        Home Depot carried it:

                        POWERCARE HYDRAULIC OIL
                        ISO 32
                        SAE10

                        UPC CODE:037049927890
                        Store SKU: 447-076

                        This is the compatable fluid for the 4-TON Ryobi according to the Ryobi Tec.

                        Comment

                        Working...