Tweet
Such a simple device, but with so many HF tools having such bad fit and finish, the 98303-0VGA T Track Hold Down clamps were a pleasant surprise. The stamped, and bent steel clamp arms were well dressed, and the finish is nice and solid, the rubber non mar caps are quite simple and effective, and the knob / nut is cleanly dressed with no sharp edges, and the knob feels good and solid.
While I could have (and probably should have) shop built my own solution, I needed to maximize shop time on other projects, and I HAD to have hold downs for my DP table. These solved the problem for about half of what other vendors sell similar items for. The aluminum slot adapters in my T slot were useless, but the bolt heads were just the right size. They work very well. I am happy with them...
While I could have (and probably should have) shop built my own solution, I needed to maximize shop time on other projects, and I HAD to have hold downs for my DP table. These solved the problem for about half of what other vendors sell similar items for. The aluminum slot adapters in my T slot were useless, but the bolt heads were just the right size. They work very well. I am happy with them...