Water Buffalo Blank

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TB Roye
    Veteran Member
    • Jan 2004
    • 2969
    • Sacramento, CA, USA.
    • BT3100
    #1

    Water Buffalo Blank

    Just got back from Woodworking show. Not much there, very few people. The Crafts USA booth was there so I picked some Acrylic blanks and Jr Gent Blk Titanium Roller Ball kit. Also bought a Water Buffalo blank for the kit. Any Suggestion on turning this smelly blank. Also picked up some wood blanks from Cooks Hardwood. Tulip Wood, Koa, Kingswood.

    Tom
    Tags: None
    • Russianwolf
      Veteran Member
      • Jan 2004
      • 3152
      • Martinsburg, WV, USA.
      • One of them there Toy saws
      #2
      some recommend soaking them in water for a day before turning. I turned mine in the raw, smells like burning hair as you are turning it. Some pieces have natural cracks in them, others will crack after you turn them. I'd let it rest for a day before assembling to make sure you don't need to do any repairs.
      Mike
      Lakota's Dad

      If at first you don't succeed, deny you were trying in the first place.

        Comment

        • Uncle Cracker
          The Full Monte
          • May 2007
          • 7091
          • Sunshine State
          • BT3000
          #3
          Originally posted by Russianwolf
          I turned mine in the raw...
          Whoa! Too much information.

          Originally posted by Russianwolf
          ...smells like burning hair as you are turning it.
          Now I'm really worried... Should've at least worn an apron.

            Comment

            • Russianwolf
              Veteran Member
              • Jan 2004
              • 3152
              • Martinsburg, WV, USA.
              • One of them there Toy saws
              #4
              UC, Horn is the same material (cellularly) that hair is made of, that's why the smell is similar. Atler on the other hand is bone, so it smells like drilling teeth. (same for ivory)
              Mike
              Lakota's Dad

              If at first you don't succeed, deny you were trying in the first place.

                Comment

                • TB Roye
                  Veteran Member
                  • Jan 2004
                  • 2969
                  • Sacramento, CA, USA.
                  • BT3100
                  #5
                  According to the CSUSA catalog these blanks have been stablized. What to you use to finish them? is probably what I should have asked. Now if my neighbor turned in the raw, that would be nice, me UG!

                    Comment

                    • Uncle Cracker
                      The Full Monte
                      • May 2007
                      • 7091
                      • Sunshine State
                      • BT3000
                      #6
                      Originally posted by TB Roye
                      What to you use to finish them?
                      I've used CA/BLO on elk and deer antler with good results. I assume buffalo would be similar, but I have not tried it.

                        Comment

                        Previous template Next

                        Footer Ad

                        Collapse
                        Working...