Ryobi IR002 Gun

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Jim Frye
    Veteran Member
    • Dec 2002
    • 1359
    • Maumee, OH, USA.
    • Ryobi BT3000 & BT3100

    #1

    Ryobi IR002 Gun

    I just received this infrared thermometer and it is a neat gadget. Now, I wonder how I will use it. I have the feeling that this will be one of those toys that will come in handy some day, I just don't know what for yet.
    Jim Frye
    The Nut in the Cellar.
    I've gone out to look for myself. If I return before I get back, have me wait for me.
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 22052
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    I have one of those laser-aimed, IR reading guns. What I use it for...
    check the oven temperature calibration when my wife complains
    check the air at the air conditioning outlets, should blow 60 degree air or so on a hot day, if its not then the A/C is broken, time to call the repair man.
    check for abnormally hot spots on stereo, TV, etc electronics items, and lighting fixtures
    Check the refrigerator and freezer compartments for the right temperature
    look for hot or cold spots on the wall due to lack of insulation. check surface temperature of motors and stuff in the shop.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • master53yoda
      Established Member
      • Oct 2008
      • 456
      • Spokane Washington
      • bt 3000 2 of them and a shopsmith ( but not for the tablesaw part)

      #3
      I use mine when I'm cooking in dutch ovens on open fires they are really handy.

      I have also used them to check for leaking steam traps, bad electrical connections, bad bearing on large fans that you couldn't shut off without getting hollered at etc. vary handy tool.
      Art

      If you don't want to know, Don't ask

      If I could come back as anyone one in history, It would be the man I could have been and wasn't....

      Comment

      • Hellrazor
        Veteran Member
        • Dec 2003
        • 2091
        • Abyss, PA
        • Ridgid R4512

        #4
        I use them at work for heating/cooling issues. You can use them to check oven temps, food temps, pool water temp, etc too.

        Comment

        • Alex Franke
          Veteran Member
          • Feb 2007
          • 2641
          • Chapel Hill, NC
          • Ryobi BT3100

          #5
          Been thinging about picking up one of those...

          Originally posted by LCHIEN
          check the oven temperature calibration when my wife complains
          ROFL
          online at http://www.theFrankes.com
          while ( !( succeed = try() ) ) ;
          "Life is short, Art long, Occasion sudden and dangerous, Experience deceitful, and Judgment difficult." -Hippocrates

          Comment

          • LCHIEN
            Super Moderator
            • Dec 2002
            • 22052
            • Katy, TX, USA.
            • BT3000 vintage 1999

            #6
            Originally posted by Alex Franke
            Been thinging about picking up one of those...



            ROFL

            My wife is one of those who thinks everything is broken.
            Something always smells like it's burning.
            or gas leaking
            or water dripping.
            OR she always tells me the air conditioning is broken if she feels just a little warm and if dinner did not come out perfect,
            the oven temperature is wrong.

            The washing machine or the dryer makes funny noises (I would too if I had been working for 30 years)

            The car always makes funny noises and a spot of water anywhere means something's leaking.

            one time in ten or twenty she might be onto something so i always have to check.

            OTOH, If a bulb burns out, she says she thinks there's something wrong with the light (duh!)

            She doen't spend too much money on clothes though. She end up taking most everything back because
            1. the seams not straight
            2, the arms aren't the same length (off by 1/16th of an inch)
            3 the shoes aren't exactly the same color (right and left)
            4. size 7-1/2 is too big and size 7 too small
            5. etc, etc etc.
            Last edited by LCHIEN; 04-18-2009, 03:12 PM.
            Loring in Katy, TX USA
            If your only tool is a hammer, you tend to treat all problems as if they were nails.
            BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

            Comment

            • Tom Slick
              Veteran Member
              • May 2005
              • 2913
              • Paso Robles, Calif, USA.
              • sears BT3 clone

              #7
              Make sure to pay attention to the instructions and how the measuring zone is calculated. as you are further away from the object the thermometer is measuring a larger area. for instance at 10" you are measuring a 1" spot, at 10' you are measuring a 1' spot. Also they become less accurate as the color is more reflective, they prefer flat back surfaces.
              Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

              Comment

              • Jim Frye
                Veteran Member
                • Dec 2002
                • 1359
                • Maumee, OH, USA.
                • Ryobi BT3000 & BT3100

                #8
                Life in the zone

                Originally posted by Tom Slick
                Make sure to pay attention to the instructions and how the measuring zone is calculated. as you are further away from the object the thermometer is measuring a larger area. for instance at 10" you are measuring a 1" spot, at 10' you are measuring a 1' spot. Also they become less accurate as the color is more reflective, they prefer flat back surfaces.
                Yes, the instructions say to measure within 2 feet. Also have the laser pointer on the spot to be measured. Actually I have found a use for it already. The dog (2 yr old lunatic Boxer) thinks its a gas to chase the laser dot around the room!
                Jim Frye
                The Nut in the Cellar.
                I've gone out to look for myself. If I return before I get back, have me wait for me.

                Comment

                Working...