My Haul From Tom's Shop

[Pappy]

I dropped $133 at Tom's sale today. For that I got....

a 3 x 7 pice of white 1/4" plexi.


A couple of pieces of nice white oak, a chunk of 8/3 Cherry, some shelf pins, a few false drawer front screws, and a set of carbide knives for an 8" jointer. The board standing up is 5/4 Mahogany just over 5" wide and 12' long


That came to $33. The other $100 got this in the truck.


Grizzly 8" x 60" edge sander. I need to down load the manual and go thru it good.

[Hoover]

I believe that qualifies for a big:

[bigstick509]

[Richard in Smithville]

Looks like $100 well spent.

[SARGE..g-47]

You stole the edge sander and then took some wood and plexi to boot. Bad boy..

[dbhost]

How are you ever going to fit that into your shop?

[JeffW]

Great score Don. You done good.

[Tom Miller]

How are you ever going to fit that into your shop?

What are you talking about? It looks like it's already in his shop!

Nice score, Pappy!

Regards,
Tom

[Copper]

The other $100 got this in the truck.

Heck, I would have paid almost $100 just to have someone help me get it in the truck in addition to what I paid for the sander!!

[herb fellows]

You suck and congratulations. There, that oughta cover it! Nice haul!

[kevincan]

Nice Haul!

The edge sander looks great.

[Pappy]

Actually, this is the G1140 but Tom added the wood table similar to what comes on the G0512 model. The table top has some serious wear so I will either cut it down or scrap it completely. Another option is to make a top that can be easily put on and removed to reduce the overall foot print when not in use.

This is the stock configuration.