Harbor Freight Multifunction Tool

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts

  • Mr__Bill
    replied
    Originally posted by Salty
    All HF tools are multi-function tools!
    There is the intended use for which is is good for 1 or 2 times.
    Then the resulting pieces or 'dead' tools is used for a hammer or door stop or a boat anchor...etc.
    I have found that the HF angle grinder works just as well as the Makita after they both were dropped off of the roof. The difference being that I can drop several HF to each Makita. (that's a cost benefit comparison analysts.)


    Bill,
    Last edited by Mr__Bill; 02-06-2009, 10:21 PM.

    Leave a comment:


  • crokett
    replied
    Originally posted by Salty
    All HF tools are multi-function tools!
    There is the intended use for which is is good for 1 or 2 times.
    Then the resulting pieces or 'dead' tools is used for a hammer or door stop or a boat anchor...etc.
    I used to think that. I bought a HF 7" sander polisher for a project because it was cheaper than renting. I've used it several times since then and it still works fine.

    Leave a comment:


  • Hellrazor
    replied
    Originally posted by Salty
    All HF tools are multi-function tools!
    There is the intended use for which is is good for 1 or 2 times.
    Then the resulting pieces or 'dead' tools is used for a hammer or door stop or a boat anchor...etc.
    Thats not bad... I was never really pay attention to anything that says Harbor Freight. I read the topic as "Harbor Freight malfunction tool" and had to reread it

    Leave a comment:


  • Salty
    replied
    All HF tools are multi-function tools!
    There is the intended use for which is is good for 1 or 2 times.
    Then the resulting pieces or 'dead' tools is used for a hammer or door stop or a boat anchor...etc.

    Leave a comment:


  • master53yoda
    replied
    I found that with all of my HF tools that have a gearbox, and anything with a right angle output from the motor does, the gearbox has had no grease in it. So check and put some grease in them and they last way longer. Or buy their 2 year warranty with the 20% off coupon.

    Leave a comment:


  • jhgrady
    replied
    Hi,

    Works well - blades have 4 index holes.

    John

    Leave a comment:


  • dealweb
    replied
    Do those HF blades work with the Fein Multimaster?

    Leave a comment:


  • Mr__Bill
    replied
    Here is a link to everything you may want to know about multi tools, AKA Oscillating Tools. Look for the Chicago Electric links for info and user feedback.

    $45 is not bad and with the 20% off coupon even better.

    If you get it let us know how you like it/don't like it.

    Bill

    Leave a comment:


  • Uncle Hook
    started a topic Harbor Freight Multifunction Tool

    Harbor Freight Multifunction Tool

    Does anyone own this tool?

    I am wondering what things it might be handy for and whether it is any good.

    I just got a flyer saying it is on sale for around $45 if my memory is correct.

    http://www.harborfreight.com/cpi/cta...emnumber=65700
Working...