HF BS assembly

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jarhead
    Senior Member
    • May 2004
    • 695
    • Boynton Beach, FL.

    #16
    quote:Originally posted by markmt

    " You Catch More Flies With Honey, Than You Do with Vinegar".
    Didn't work in this case. I called the CS and was told that since I bought the item at a retail store, they cannot help me. Had I purchased it from a catalog, they would ship me the parts or a new BS . I will call the retail store again and try to resolve the situation, otherwise I am calling the credit card company and having them dispute the charge.

    [edit]
    Got an update - called the retail store again and had another discussion with the store manager. I calmly explained the situation again and asked her to either ship me a new BS or give me a discount for selling a used product. At first she tried to convince me that it may have beed a recondishined saw from the factory [:0]. My reply was that in that case, the factory should have at least cleaned of the saw dust. The bottom line, I got her to give me $50 off.
    I continued to assemble the BS tonight only to find out that some more hardware is missing here and there. For example, the manual states that I should have 12 plastic tabs for holding the 2 side panels, but I only have 6. I hope the BS will work after I am finished with the assembly.
    [/edit]

    Comment

    • markmt
      Forum Newbie
      • Dec 2003
      • 69
      • kathleen, georgia, USA.

      #17
      Jarhead,I would take tht deal. The tabs are just holders for the front/back plastic shield. I put mine on hinges,works great. Glad it worked out.

      mt
      Semper Fi

      Comment

      • jarhead
        Senior Member
        • May 2004
        • 695
        • Boynton Beach, FL.

        #18
        quote:Originally posted by markmt

        Jarhead,I would take tht deal. The tabs are just holders for the front/back plastic shield. I put mine on hinges,works great. Glad it worked out.

        mt
        Semper Fi
        Mark,
        I decided to keep the BS at this price. Quickly confirmed tonight that the motor is running.
        It looks like I am left with some extra hardware - is that normal for HF? I did have to buy some bolts to mount the motor though.
        One thing that got me stumped is the the guide post guard bolt. The circled bolt holding the guard is the only size that fits and it is too long [:0]. Did I screw something up? Also, the circled hardware on the BS table is what's left over - what is that long bolt for?

        Comment

        • Lonnie in Orlando
          Senior Member
          • May 2003
          • 649
          • Orlando, FL, USA.
          • BT3000

          #19
          jarhead:

          re: The bolt on the guide post guard. A nut and washer go between the guard and the head of the bolt. Don't bottom out the bolt. Secure the guard with the nut.

          re: The long bolt resting on the table. It may be the stop that the table sits against @ 90-degrees. It goes in the threaded hole behind the date in your picture. Double-nut it to lock the position. You can buy more bolts and nut them for commonly used table angles for fast setup.

          Now two HF questions ...
          1) What is the purpose of the guard? (I installed mine, too -- just because I am too anal to leave it off.)

          2) Why is the "Wood Cutting" sticker on the BACK of the table? Mine was upside down, to boot!

          The saw is a good value, but it has some screwy quirks!

          - Lonnie
          OLD STUFF ... houses, furniture, cars, wine ... I love it all

          Comment

          • AlanWS
            Established Member
            • Dec 2003
            • 257
            • Shorewood, WI.

            #20
            The guard for the upper part of the guide post is useless, but I found a use for the bolt and its threaded hole. I'd minimized saw vibration by shimming the feet to level the table, and by using a link belt. But after installing a riser block, I found that some vibration had returned. I bolted a long thin piece of wood (3/4" x 3/8" cross section) to the guidepost guard hole in the casting, slanting back and up to the ceiling, where I clamped it to an overhead floor joist. This made the saw absolutely solid, and my cuts are very smooth. It now behaves more like an enclosed base saw: if I grasp the table and try to shake it forward and back, it does not move. If I need to move the saw, I can quickly unclamp the brace from the ceiling.
            Alan

            Comment

            • markmt
              Forum Newbie
              • Dec 2003
              • 69
              • kathleen, georgia, USA.

              #21
              Jarhead: I always have leftover HF hardware on everything, better than not enough. There are two long bolts,one connects the saw top to the base and the other is a stop for the table. My guess is it is the stop. The blade guard is not an option to leave off. Best to just attach with a nut and bolt that does not interfere with the blade. Best way to check everything is after final assembly,leave the green cover off that are over the wheels,tension blade,POWER OFF and spin the wheels. No grinding means you are close to success. Your next step is to decide mobility or not and riser or not. i have the riser,if you opt for a riser you have to order on line only and get the HF riser,it fits great, also get the link belts from HF (online only). Now isn't this just fun. After it is all over,this is without a doubt a good bandsaw.

              mt
              happy turkey day

              Comment

              • Snap Marc
                Established Member
                • Sep 2004
                • 167
                • Atlanta, GA, USA.
                • Jet ProSHOP Full Cast Iron Hybrid

                #22
                Thanks to everyone for all of the feedback and help in my search for a BS. My HF is now complete, but I have 2 parts left over. Here is a pic.

                Part A. and Part B.

                Part B. I think I found listed as part UL in the diagram. I have included that in this photo. But I can't figure out where it goes.

                Part A. I think goes on the bottom wheel cover to protect from the exposed blade just under the table, but since I added the dust collection attachment, it no longer fits. Is this correct?


                --
                Marc
                Roswell, GA

                \"You get what you pay for.\"

                Comment

                • markmt
                  Forum Newbie
                  • Dec 2003
                  • 69
                  • kathleen, georgia, USA.

                  #23
                  Snap Marc: Part "A" is for dust collection,not neded if you use the tube. Part "B" is your front post guard. Up to you.

                  mark taylor

                  Comment

                  • Snap Marc
                    Established Member
                    • Sep 2004
                    • 167
                    • Atlanta, GA, USA.
                    • Jet ProSHOP Full Cast Iron Hybrid

                    #24
                    Thanks!

                    I do use the tube with my ShopVac attached.
                    How is Part B, the Front Guard used?
                    --
                    Marc
                    Roswell, GA

                    \"You get what you pay for.\"

                    Comment

                    Working...