New Table Saw
Collapse
This topic is closed.
X
X
-
Thanks for the link, Paul. It seems the saw you mention is a contractor's saw and has a 1.5 HP motor. The new JET saw I'm referring to is a hybrid saw with an enclosed base for dust control. Powered by a 1.75 HP motor, it also feature JET's PROSHOP fence. The saw you sent a link to is a right tilt blade, I shopping for a left tilt blade which is what the JET 708480K is.
Here is a link to JET's site. The saw is brand new and is hardly described by even JET themselves.
http://www.jettools.com/Shop/index.c...=4&iid=6060660
There's even more info on Sears' site. They seem to have their act together even more so than JET.
http://www.sears.com/sr/javasr/produ...0100600&AFFL=Y
So anyway, thanks for your comments. But we're talking about completely different saws.
I'm trying to find maybe even one review about JETs new 708480K or 708482K table saws. These things are newer than new so it seems no one has become too familiar with them yet. Maybe I'll be the guinea pig.--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
I had no idea there was a newer model. Is it still the Ridgid TS3650?
Here's Ridgid's site. Maybe this one is the newer one???
http://www.ridgid.com/Tools/TS3650-T...w/EN/index.htm--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
Yah that's the model TS3650. The older ones 3612, 2424, 2412 were grey and had webbed wings like this.I had no idea there was a newer model. Is it still the Ridgid TS3650?
Here's Ridgid's site. Maybe this one is the newer one???
http://www.ridgid.com/Tools/TS3650-T...w/EN/index.htm-PaulComment
-
Webbed Wings
Ahhh yes, those are quite the webbed wings. The new one still have a slit of webbing in each wing, but only one strip in each. Are they just to cut down on the amount of cast iron used? Maybe weight? I was wondering if they had any fuinctionality such as clamping or for fixtures, etc.
Which TS do you drive?--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
Marc,Ahhh yes, those are quite the webbed wings. The new one still have a slit of webbing in each wing, but only one strip in each. Are they just to cut down on the amount of cast iron used? Maybe weight? I was wondering if they had any fuinctionality such as clamping or for fixtures, etc.
Which TS do you drive?
Yes, the openings in the wings are for clamping jigs and fixtures. I don't use them often but when I need to use them they are very handy to have.Comment
-
Tom Hintz has a review of that saw with CI wings:... I'm trying to find maybe even one review about JETs new 708480K or 708482K table saws. These things are newer than new so it seems no one has become too familiar with them yet. Maybe I'll be the guinea pig.
http://www.newwoodworker.com/reviews...hopsawrvu.htmlLast edited by Knottscott; 07-04-2007, 08:33 AM.Happiness is sort of like wetting your pants....everyone can see it, but only you can feel the warmth.

Comment
-
Perfect
Thanks so much. That's exactly what I was looking for. Let me give it a read. At first glance it seems like he liked it. I'll check back in in a few.
(15 minutes later)
Great review. I think this may be the one for me. Has some really nice features and seems solid.Last edited by Snap Marc; 07-04-2007, 08:41 AM.--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
New Table Saw - PURCHASED!!!
Okay, thanks to everyone who helped me in my decision. Finally, I went with JETs newest model, the 708482K. It is considered a hybrid saw by most and sports a 100% cast iron top with cast iron wings. The motor is 1.75HP and the cabinet is fully enclosed for dust control. The saw retails for about $850, but I got one today for $630 at WoodCraft. Their sale price was $699, but the new owner gave me an additional 10% off. Great deal if you ask me.
I had once decided on the Ridgid, and I still really like that saw. But for $80 more, I get an extra .25HP, a hybrid saw and a few other features the Ridgid doesn't have.
The JET does not have an integrated mobile base, but hey, I can get one anytime I like.
Now I need the best all purpose blade. Anyone?
Here's what I bought....--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
Congrats Marc - Looks like a great saw for that price, and I agree about the mobile base...you can easily add one, but is much harder to tuck an outboard motor on the inside of the cabinet!
There are alot of really great choices in blades. I'd think a good thin kerf would be excellent in that saw. For the past week or so I"ve been spinning a 30T Forrest WWII that I REALLY like....outstanding choice if you want a one blade show. The cut quality on crosscuts and rips is just about on par with the 40T but it rips more aggressively...closer to a good 24T ripper. I've also been running the 50T Infinity Combomax TK this summer and am quite pleased with that as well...very clean crosscuts, and very good rips too. The 40T WWII is always a crowd favorite, and the Ridge Carbide TS2000 TK is every bit as good with considerably thicker carbide. The Freud LU88 60T is also one of my favorites...it obviously makes clean crosscuts but dang that thing rips well to ~ 6/4" too making it suitable for general purpose work.
It's always a good idea to have a decent 24T TK ripper on hand regardless of which primary blade you choose. I ripped a 5' board of 50 year old 3" thick wine vat QSWO today and was pretty pleased with the feedrate on my 1-3/4hp saw. Dunno if the 30T WWII would have done it justice or not, but I'd rather not dull it up on that kind of work anyway.
Mike Jackson still has some of the German made Leitz/Irwin 24T FTG TK's for $10...excellent ripper, unbeatable value. 10" z24 FLAT TOP fast rip thin kerf #011 $ $10 each
Hope this helps more than confuses...let me know if you have any specific questions.Happiness is sort of like wetting your pants....everyone can see it, but only you can feel the warmth.

Comment
-
Pretty Sharp!
Thanks Dustmight,
That was quite the blade gospel. I did, in fact, buy a German made Leitz/Irwin 24T FTG TK's for $10. That guy selling is quick. Within 5 minutes, I had e-mailed him, paid him via PayPal and he responded saying the deal was done. An hour or so later, he sent me a UPS tracking number. Very nice. So it's on the way.
So I appreciate the referral. Now I just need a general purpose blade for the new saw.
I did see a nice DeWalt combo pack (2 blades) for $40 and a nice Diablo blade for $55.
Any thoughts?--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
Freud Industrial blades are far better than the Diablos, and can be had for quite a bit less when the Jungle has their 20% off blades.Thanks Dustmight,
That was quite the blade gospel. I did, in fact, buy a German made Leitz/Irwin 24T FTG TK's for $10. That guy selling is quick. Within 5 minutes, I had e-mailed him, paid him via PayPal and he responded saying the deal was done. An hour or so later, he sent me a UPS tracking number. Very nice. So it's on the way.
So I appreciate the referral. Now I just need a general purpose blade for the new saw.
I did see a nice DeWalt combo pack (2 blades) for $40 and a nice Diablo blade for $55.
Any thoughts?
Freud LU84R011 50T combi (currently $55)
Freud LU83R010 (currently $45, but can be had for ~$35 del.) " " (thin kerf) both are great for the money.
I have the thin kerf, a freud industrial rip blade, and a forrest. the forrest WWII is flippin awesome (about $90), but for the money, the Freud's are pretty sweet IMO.PeteComment
-
Marc, a general purpose blade will be between 30 and 60 teeth, with most being 40-50T. I'd suggest avoiding the DW construction line for fine woodworking, and as Cheeky mentioned, the Freud Industrial line is a step up from the Diablo...often for little to no price increase. The LU83 he mentioned would be a very good choice for ~ $45.
That Diablo or other good quality 80T dedicated crosscut blade will leave a very clean edge but won't be versatile enough to be a good general purpose blade if that's what you're after. Nothing wrong with swapping blades between your 24T ripper and an 80T x-cutter for specific tasks...alot of folks do.
If you're looking to pick up a blade from your local HD or Lowes, I'd go with the Ridgid Titanium R1050C, Freud Avanti TK306, TK906, Diablo 1040X, or 1050X, otherwise I'd aim for top shelf via mail order from Holbren ($80) with "BT310" code, Amazon ($45) or ($90) , Infinity ($65), Hartville, Rockler, etc. You saved enough on the saw and ripper deal to spring for a REALLY nice blade to make your saw sing!
Let us know what you end up getting.Happiness is sort of like wetting your pants....everyone can see it, but only you can feel the warmth.

Comment
-
Just Do It
Okay, I'll stay away from the carpentry series blades. You know what, I'm gonnna buy the Forrest 40T WWII. Why not just get the best for my new table saw. I keep reading about some sort of thin kerf stabelizer discs. Will I need those?
My local Woodcraft Store is offering the 40T WWII for $89.95 less 10%. I'll pay 7% tax, though.
Do these 40T WWII blades ever go on sale? Is $89 pretty standard?
So now, how about zero clearence throat plates for this new JET ProShop saw?--
Marc
Roswell, GA
\"You get what you pay for.\"Comment
-
That's a pretty respectable price for that blade. I did snag a thin kerf one for about 65$ on Amazon one time. I am now using the full kerf model though, make sure your splitter is going to be ok with the TK blade.Keith Z. Leonard
Go Steelers!Comment

Comment