Wax for TS

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • p8ntblr
    Senior Member
    • Jan 2007
    • 921
    • So Cal
    • Craftsman 22114

    #16
    Originally posted by jziegler
    I'm not in CA, but I found the Johnson's at Lowes. HD around here carries the Minwax. Look in the cleaning section of Lowes.

    I also used the Johnson's on the saw.

    Jim
    Ok I'll give it a try. I checked their website (and HD) and they don't have it there but maybe they just don't list it.
    -Paul

    Comment

    • bthere
      Established Member
      • Jan 2007
      • 462
      • Alpharetta, GA

      #17
      I use JPW and Minwax.

      The Johnson's Paste Wax you don't want to use it the one they make for floors. The variety for floors does have the antislip compound.

      Comment

      • BrazosJake
        Veteran Member
        • Nov 2003
        • 1148
        • Benbrook, TX.
        • Emerson-built Craftsman

        #18
        Originally posted by dgcoles
        Minwax Paste wax. Works just as good, but costs more than JPW. I can't get Johnsons around here.
        Ditto that.

        Anyone T9 or similar? Is it worth it?

        Comment

        • BrazosJake
          Veteran Member
          • Nov 2003
          • 1148
          • Benbrook, TX.
          • Emerson-built Craftsman

          #19
          Originally posted by LarryG
          That sounds like it. I'd describe the can as either yellow or gold, with a red swoosh and black lettering.

          I'm a long way from SoCal but here it's available at Wal-Mart and Lowe's. Can't recall if I've ever looked for it at Home Depot.
          I get my Minwax from BORG. It was with the finishing products, but that's been awhile back. Believe Lowes is the same.

          Comment

          • LarryG
            The Full Monte
            • May 2004
            • 6693
            • Off The Back
            • Powermatic PM2000, BT3100-1

            #20
            Originally posted by BrazosJake
            Anyone T9 or similar? Is it worth it?
            I use T9 for rust protection; the slipperiness is an added side benefit. The only thing I use Johnson's for is to wax my assembly table.

            The T9 imparts a soft, silky feel to cast iron ... kind of strange, at first.
            Larry

            Comment

            Working...