Wife gloating!

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • kwgeorge
    Veteran Member
    • Jan 2004
    • 1419
    • Alvin, TX, USA.

    #1

    Wife gloating!

    Well you just ever have one of those weekends that everything seems to not be going your way but then it ends up coming out much better than you expected? That’s how it went for me this weekend. We started out deciding to take a bit of a road trip up to Austin so the wife could do some antique shopping. Myself on was on the quest for a sander that my wife was going to buy me for my birthday. The Houston Woodcraft had none and all the ones they had on order were pre-sold. So I thought as long as we were in Austin I would check out that Woodcraft. Here is what I was after;

    Rikon Sander


    Well they also had none and again they had even the ones on order already spoken for. They led me to believe that these things were going to be hard to get as the demand is exceeding the supply. So I was quite disappointed and we were at the end of the trip. Now the wife had bought a antique chair and did her best to wipe out the outlet mall in San Marcos. I guess she felt bad for me as I had bought nothing and we would probably not be able to get the sander before my birthday so she pointed to this one and asked if it would work for me;

    Jet Sander


    So I think I answered yes in about .5 miliseconds and we loaded this puppy up! It is some kind of nice and I am looking forward to working with it.


    Specifications link
    http://www.wmhtoolgroup.com/shop/ind...ge=4&iid=12914

    Ken
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 22106
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    I don't get it Ken, are you gloating about the wife or the sander or both?

    or the fact that you have a vehilce big enough for a closed stand upright sander and an antique rocker as well as the half contents of the san marcos outlet mall?
    Last edited by LCHIEN; 09-03-2006, 10:06 PM.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • cgallery
      Veteran Member
      • Sep 2004
      • 4503
      • Milwaukee, WI
      • BT3K

      #3
      So the reports of a downturn in consumer confidence seem to be exagerated.

      Enjoy the sander!

      Comment

      • rickd
        Established Member
        • Jan 2004
        • 422
        • Cowichan Bay, 30 mi. north of Victoria, B.C., Canada.
        • Ryobi BT3100

        #4
        That's a definite double gloat, Ken. Both for your wife and the sander - they are both terrific!
        rick doyle

        Rick's Woodworking Website

        Comment

        • beetee3
          Established Member
          • Feb 2005
          • 127
          • The Sunshine State

          #5
          Umm... you're gloating that your wife wants you to have a bigger "tool"?

          Comment

          • mikel
            Established Member
            • Jul 2006
            • 202
            • philadelphia
            • bt 3100

            #6
            Cool, what does it cost? I'm looking too..


            ...mikel

            Comment

            • Ken Weaver
              Veteran Member
              • Feb 2004
              • 2417
              • Clemson, SC, USA
              • Rigid TS3650

              #7
              Good score Ken - so the trip was worthwhile after all.
              Ken Weaver
              Clemson, SC

              "A mistake is absolute proof that someone tried to do something!

              Comment

              • Ken Massingale
                Veteran Member
                • Dec 2002
                • 3862
                • Liberty, SC, USA.
                • Ridgid TS3650

                #8
                Congrats, Ken.

                Comment

                • kwgeorge
                  Veteran Member
                  • Jan 2004
                  • 1419
                  • Alvin, TX, USA.

                  #9
                  Thanks guys, I am going to love it I think. Although I think to understand my excitement you need to understand what I am coming from. I currently have and have owned for probably 15 years a small bench sander. This sander is very much like the Harbor Freight 93981-0VGA. Now this machine has served me rather well but has its issues. For one it has no dust collection and that alone is getting to be very important to me. For another the table on the disc basically sucks. It takes very little pressure to flex it and any accuracy at all is just a dream. It has served me well over the years but I really wanted something better that I could do scarf joints and all kinds of more precision work with. I think the new one will fit that bill.

                  Loring, I am gloating about EVERYTHING at the moment! What I did not mention was that the sander was purchased in San Antonio. We went from Austin to San Marcos to San Antonio looking for my birthday gift. The guys there are great and helped me rearrange the SUV to get the sander in it and I think that alone took 45 minutes! They also loaded it for me. Kudos to the San Antonio Woodcraft!

                  Cgallery; You obviously have never been shopping with my wife! We are pretty fortunate and both work for the same company in different areas. We both just received our profit sharing and decided to spend some/save some.

                  The cabinet on the sander has a built in roller lift so I think it will be nice now I just got to figure out where to put it! I guess that’s what I get for not planning ahead.

                  Ken

                  Comment

                  • Pappy
                    The Full Monte
                    • Dec 2002
                    • 10490
                    • San Marcos, TX, USA.
                    • BT3000 (x2)

                    #10
                    You, I don't like anymore!

                    First, you get on here going on and on about your wonderful wife, the capacity of your vehicle, and the size of your tool.

                    Then, to top it off, I discover that you went through San Marcos and passed within 1/4 mile of the Playpen twice and didn't stop to say Howdy!

                    BTW: Nice gloat!
                    Last edited by Pappy; 09-04-2006, 08:25 AM.
                    Don, aka Pappy,

                    Wise men talk because they have something to say,
                    Fools because they have to say something.
                    Plato

                    Comment

                    • wardprobst
                      Senior Member
                      • Jan 2006
                      • 681
                      • Wichita Falls, TX, USA.
                      • Craftsman 22811

                      #11
                      I don't know about the rocker but the wife and the sander are keepers!
                      DP
                      www.wardprobst.com

                      Comment

                      • gimpy
                        Established Member
                        • Nov 2004
                        • 197
                        • Flagstaff, AZ.
                        • BT3100

                        #12
                        That's great that your wife did that for you. And looks like you scored well on your sander, too.

                        I'm thinking that I will take my wife with me more often. Mine did much the same thing as yours did, for me yesterday. We went in to purchase some wood for a project and to look at a miter saw I had planned on buying. I had planned on getting a 10 incher when she started looking at the 12 inch Ridgid and suggested that I get "as good a one as possible" as long as we had the money and was buying one. Can't beat that. She talked me into it right there.

                        I almost went with the new 12 inch Dewalt that was on display (we also looked at it), but decided that I wanted the lifetime warranty on the Ridgid. It wasn't because the Dewalt (DW 715, I think) was about $30.00 more (I am pretty cheap). She left the choice up to me. And really, this is not the first time she has done something like this with me. So, as I said earlier, I think I will try to take her with me more often.

                        Sorry for the hijack. Hope you don't mind too much.

                        Frank
                        Frank, "Still the one"

                        Comment

                        • mater
                          Veteran Member
                          • Jan 2004
                          • 4197
                          • SC, USA.

                          #13
                          That is a great looking sander. I was looking at one a few months back and drooling. Congratulations.
                          Ken aka "mater"

                          " People may doubt what you say but they will never doubt what you do "

                          Ken's Den

                          Comment

                          • mudder
                            Veteran Member
                            • Jul 2003
                            • 1532
                            • I live in a house
                            • Delta 36-650

                            #14
                            You have gone and done it now!

                            Not only do you really suck, but now............... I hate you!



                            Nice sander Kenneth, may it give you many years of exceptional performance.

                            Comment

                            Working...