It seems that when I try to print a thread, the printer always clips the right edge of the text. This because the text as a finite minimum width, I think--in other words, if you make the window more narrow the text stays the same width.
While the best solution would be a "Print This Thread" option that would nicely format all the text from ALL the pages of the thread and print them out, an alternative might be simply to change the minimum width of the text to be something that prints within the constrains of an 8" wide paper (with allowance for common printer margins).
Don't know if printers vary too much to make this practical or useful, but thought I should at least ask.
Great site! Just want to take some of it with me sometimes.
While the best solution would be a "Print This Thread" option that would nicely format all the text from ALL the pages of the thread and print them out, an alternative might be simply to change the minimum width of the text to be something that prints within the constrains of an 8" wide paper (with allowance for common printer margins).
Don't know if printers vary too much to make this practical or useful, but thought I should at least ask.
Great site! Just want to take some of it with me sometimes.
Comment