Tweet
What I have found has been stated by others.. any attempt to attach additional dust hook-ups to the router other than the standard one get in the way.. hose's hang.. etc. I don't believe you are going to get it all when edge routing at this point and I want to be in control of a 2 1/4 HP hand held router spinning at 22,000 rpm. I don't want hose hang-ups that can spoil an edge and be potentially dangerous.
So.. I put on an apron.. dust mask.. glasses.. sit a 20" fan on the assembly table facing my work-bench.. open the outer doors and let er rip. When done.. I use an electric leaf blower from the back to shop out to get rid of the remaining dust. I then turn the over-head on and go up-stairs for coffee till it settles.
Not what you are probably looking for.. but it works and I can move on to another stage of the project.
So.. I put on an apron.. dust mask.. glasses.. sit a 20" fan on the assembly table facing my work-bench.. open the outer doors and let er rip. When done.. I use an electric leaf blower from the back to shop out to get rid of the remaining dust. I then turn the over-head on and go up-stairs for coffee till it settles.
Not what you are probably looking for.. but it works and I can move on to another stage of the project.
Comment