I want to evaluate the expected cost to complete my wood shop - to determine if I want to
do it or job it out. The floor is in (good grade vinyl) and I will add dust control. Here are the basic variables:
1. Ceilings are 9, or 9.5 feet.
2. Standard stud walls and drywall and rough finished – no texture
3. Ceiling finish to be stapled Armstrong , or similar panels on half inch stringers – just like a drop ceiling, but stapled not suspended.
4. Full electrical - outlets, etc., (panel close) with florescent lighting tube fixtures flush with ceiling panels.
5. All to full Denver building codes, no permits pulled
I am looking for some rough cost per square foot benchmark formulas, or a general range.
Any estimating advice? It’s about 15’ x 18’give or take and approximately 20% is already finished>
do it or job it out. The floor is in (good grade vinyl) and I will add dust control. Here are the basic variables:
1. Ceilings are 9, or 9.5 feet.
2. Standard stud walls and drywall and rough finished – no texture
3. Ceiling finish to be stapled Armstrong , or similar panels on half inch stringers – just like a drop ceiling, but stapled not suspended.
4. Full electrical - outlets, etc., (panel close) with florescent lighting tube fixtures flush with ceiling panels.
5. All to full Denver building codes, no permits pulled
I am looking for some rough cost per square foot benchmark formulas, or a general range.
Any estimating advice? It’s about 15’ x 18’give or take and approximately 20% is already finished>
Comment