Hey,
Working on a bar in the basement. Got a bit ahead of myself and could use some advice other than - tear it off and do it again.
1 - I glued down a glass rail and stained it before finding trim to go around the inside of it.
2 - Once I found the trim - I realized it would fit the bar-base (advantex compositeboard) perfectly had I NOT already glued the glass rail down.
3 - If you look at the images - you can see I would like to remove appoximately 1/4" from the inside length of the glass rail. The second photo, I think, shows best what I am trying to accomplish.
I just don't quite know how to do that. I have a 6' level I could clamp down and use as a straight edge. But I don't know how to cut the board JUST to remove the 1/8" glass rail (It's a reused cabinet kick board).
Any questions - please ask. I don't know if I explained it well.
Thanks! CB
Working on a bar in the basement. Got a bit ahead of myself and could use some advice other than - tear it off and do it again.
1 - I glued down a glass rail and stained it before finding trim to go around the inside of it.
2 - Once I found the trim - I realized it would fit the bar-base (advantex compositeboard) perfectly had I NOT already glued the glass rail down.
3 - If you look at the images - you can see I would like to remove appoximately 1/4" from the inside length of the glass rail. The second photo, I think, shows best what I am trying to accomplish.
I just don't quite know how to do that. I have a 6' level I could clamp down and use as a straight edge. But I don't know how to cut the board JUST to remove the 1/8" glass rail (It's a reused cabinet kick board).
Any questions - please ask. I don't know if I explained it well.
Thanks! CB
Code:
[url=http://postimg.org/image/x8e22tq7f/][img]http://s9.postimg.org/x8e22tq7f/1_A.png[/img][/url] [url=http://postimg.org/image/4u8miy2nf/][img]http://s9.postimg.org/4u8miy2nf/1_B.png[/img][/url] [url=http://postimg.org/image/wwwlq29rf/][img]http://s9.postimg.org/wwwlq29rf/1_C.png[/img][/url]
Comment