And grab some hinges, and a small catch for probably one of the most pitiful projects to date. I picked up a set of the HF Bimetal hole saws after reading a bunch of reviews and actually fiddling around with my specific set in store (assembling a couple and chucking them up to the demo drill press, to spin it and look for any wobble, there was none). I not only got the regular 14 pc set with the sizes up to 2.5", I also got the large saws, which include 3", 4", and 4.25" which would have been VERY useful in building my miter saw cabinet, and will be useful when I build the table saw workstation, but I digress...
The large hole saw set did NOT include a case like the 14pc. and I had to have a way to store the hole saws. So 10 minutes and some scrap 3/4" ply and I have a box, minus any way to attach the lid. The scrap ply I used was rather uncooperative as it split in a couple of places never minding the fact that I did drill pilot holes and counter sinks... I have GOT to drill my pilot holes deeper! But I digress.
I am pulling doubles much of this week, so it may take until this next weekend to get my 10 minute project posted.
The large hole saw set did NOT include a case like the 14pc. and I had to have a way to store the hole saws. So 10 minutes and some scrap 3/4" ply and I have a box, minus any way to attach the lid. The scrap ply I used was rather uncooperative as it split in a couple of places never minding the fact that I did drill pilot holes and counter sinks... I have GOT to drill my pilot holes deeper! But I digress.
I am pulling doubles much of this week, so it may take until this next weekend to get my 10 minute project posted.