6" thin wall PVC pipe

[cabinetman]

Getting a nice clean straight crosscut with a sawzall IMO would be unlikely.

.

[wardprobst]

You are right, I linked to the wrong saw. This the one I have which will cut that pipe: http://www.leevalley.com/US/wood/pag...=1,42884,43836
DP

[LCHIEN]

You are right, I linked to the wrong saw. This the one I have which will cut that pipe: http://www.leevalley.com/US/wood/pag...=1,42884,43836
DP

still the same link...?

[wardprobst]

It's weird but the link pulls up the same for a different page. The one I'm referring to is the Professional Model, not the standard. I hope this one works, if not, go to woodworking then saws, then miter boxes.

http://www.leevalley.com/US/Wood/pag...36&cat=1,42884

[cabinetman]

It's weird but the link pulls up the same for a different page. The one I'm referring to is the Professional Model, not the standard. I hope this one works, if not, go to woodworking then saws, then miter boxes.

http://www.leevalley.com/US/Wood/pag...36&cat=1,42884

Is this the one?
http://www.leevalley.com/US/Wood/pag...26&cat=1,42884

.

[wardprobst]

Yep, your link works, thanks!
DP

[Pappy]

Although it was smaller (2"), I used a double edge back saw to cut PVC with fair success.

http://www.lowes.com/pd_375302-281-2...saw&facetInfo=