Need A Front Loader

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jon_ramp
    Established Member
    • Feb 2007
    • 121
    • western Chicago burb
    • Craftsman 21829

    #16
    Our front loading LG has been problem free.

    Comment

    • jziegler
      Veteran Member
      • Aug 2005
      • 1149
      • Salem, NJ, USA.
      • Ryobi BT3100

      #17
      I got a midrange Kenmore about 4 years ago and have been very happy with it. It does collect water in the "tire" area that Ray pointed out, and we dry that out probably about once every half dozen loads or so. You do want to get the right detergent, which will be marked on the label as high efficiency with a HE symbol. The hard part was finding one without the dyes and perfumes, which is what LOML has always used. For the smell, tide sells a washing machine cleaning product which you run through with the machine empty occasionally, and it cleans up the residue.

      If you have a Sears outlet in your area, you might consider checking to see what they have available. When we got our washer and dryer there, we got both for the normal retail price of just the washer. Sure, there are a few small scratches on them, but we don't care about that.

      Jim

      Comment

      • parnelli
        Senior Member
        • Aug 2004
        • 585
        • .
        • bt3100

        #18
        Originally posted by cabinetman
        OK...but just this once. Incredible. I never thought doing laundry was so scientific. I'm going to have to do some research on the liquid versus powder issue. I will say that LOML is a Tide fan. She said something similar that front loaders like low sudsing detergents.
        .
        I've read the liquid vs. powder thing before too. Also- the handful of repairman and parts counter guys I've talked to have told me that you have to use the special front load soap. From a proctor and gamble rep I'd say it was bs, but these guys have nothing to gain from it....

        Comment

        • catta12
          Established Member
          • Jan 2008
          • 250
          • Reno, NV
          • BTS20R

          #19
          Originally posted by jon_ramp
          Our front loading LG has been problem free.
          +1 for our LG pair. Three years and LOML still likes them and no problems yet. We do leave the washer door ajar when not in use to dry out and have not had a mold or musty problem.
          If you can read this you assembled wrong.


          Alan

          Comment

          • jAngiel
            Senior Member
            • Oct 2003
            • 561
            • Ryobi BT3100

            #20
            We've had the Duet's for a long time and have only had minor issues. The door seal did rupture and needed to be replaced. Bought it at a local appliance repair store for less than I found online and fixed it myself. One of the shocks that support the drum broke from too large load and busted the door lock, again easily fixed by me. We did have the must smell at one time but now we usually was a while load with bleach once a week and haven't noticed it since. Sometimes we leave the door open, sometimes not. I never had an LG appliance before but have heard that they were pretty good but I like the Whirlpools mostly because the parts readily available and they are easy to work on. They hardly ever need work but when the do I prefer to do it myself instead of paying through the nose for it and having to wait a week or so for the repairman to come look at it and then another week for him to order the parts and get back to my house to fix it. I can order the parts, have them in hand in a couple of days if they are not found local the same day and have it fixed in less than an hour. With eight people in the house a broken washer/dryer is a huge deal...
            James

            Comment

            • Kristofor
              Veteran Member
              • Jul 2004
              • 1331
              • Twin Cities, MN
              • Jet JTAS10 Cabinet Saw

              #21
              I purchased a Frigidaire front loader about 6-7 years ago now. So far no issues, other than the fact that I was a bachelor at the time and didn't buy a super-jumbo model which would be nice now that I am married and have a 2 year old.

              We always leave the door open when we're done and have never noticed any mold/odor issues. We also use regular (non-HE) liquid detergent which to date hasn't seemed to be problematic. However, we use far less than the amount indicated on the package (~1/4 - 1/3 as much as indicated). This seems to be more than enough to get the clothes cleaner that with my old washer and doesn't seem to result in any buildup or grunge that I've noticed.

              I did eventually build an over-engineered platform about 14" high. This is a great height for loading and unloading. Being built out of two-by material it's plenty solid and doesn't move at all when the washer does it's super-spin-of-doom. Being at 14" versus the normal 8" or so does put the dryer (several years older than the washer) controls at a fairly long reach (top/back of the dryer) but I'm over 6' and my wife is 5'11" so it's an easy reach for us. I'm not sure a 5' tall woman or kids could reach without a step.

              Comment

              • Tom Slick
                Veteran Member
                • May 2005
                • 2913
                • Paso Robles, Calif, USA.
                • sears BT3 clone

                #22
                We've had a Whirlpool Duet for a couple of years and it's great, no issues. When it's not in use we just leave the door unlatched, no mildew smell issues.
                Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

                Comment

                • Mr__Bill
                  Veteran Member
                  • May 2007
                  • 2096
                  • Tacoma, WA
                  • BT3000

                  #23
                  Originally posted by Kristofor
                  I purchased a Frigidaire front loader about 6-7 years ago now.

                  It sounds like you have the same washer we have and about the same age. I have found that for most loads about a tablespoon of liquid detergent is enough. This washer is never out of balance and walking about. If it can not balance the load it just does not spin. Makes for some wet rugs if washed alone. (And if you have animals you know why it's washed alone.)

                  I periodically wash the shop and dog towels and use sudsy ammonia. That seems to keep the mold smell down too.

                  Bill, over here in the rain, nothing like the smell of a wet dog unless it's a skunk.

                  Comment

                  • jking
                    Senior Member
                    • May 2003
                    • 972
                    • Des Moines, IA.
                    • BT3100

                    #24
                    Originally posted by Jim Frye
                    Just kidding. The lady that runs the local appliance parts store here advised me to stay away from Maytag. Severe quality plummet since being bought by Whirlpool. My Daughter had Fridgidare appliances installed in her new home three years ago and has had problems with nearly every one of them. Washer, Dryer, Dishwasher, and the Refridgerator. Only the stove had not required a service call. Granted all were under warranty, but the washer required a new mother board and that would have been expensive.
                    The quality problems started before Whirlpool bought them. The combination of quality issues & high overheads were what ultimately doomed Maytag. Why pay more for a Maytag when the quality is no better than anything else on the market?

                    Comment

                    • alpha
                      Established Member
                      • Dec 2003
                      • 352
                      • Owensboro, KY, USA.

                      #25
                      We bought a Kenmore made by Frigidare about 7-8 years ago I believe. It was before the front load washers became popular in the US and not many retailers carried them. It was top rated by Consumer Reports at the time. It survived 2 moves and we have not had the first bit of trouble with it.

                      My 2008 Consumer Reports Buying Guide lists LG Tromm SteamWasher at $1500 as the best. If I was in the market for a new FL washer, I would take a quick trip to the library and look up the ratings in Consumer Reports and make a copy of the page. I also pick models that are popular which more than one retailer carries. Then I start my price match "game" by searching for the model on-line and printing out the best delivered prices. I have had good luck and my best price matches at Lowes. For me, they have matched my best on-line price after all taxes and delivery charges. Hope this helps.

                      Comment

                      • jaybee
                        Established Member
                        • Feb 2006
                        • 157
                        • Regina, SK, Canada
                        • BT3100-1

                        #26
                        Bought the basic Frigidaire from Sears as soon as it came out. After we moved, I bought the base and built a base for the (non-matching) dryer. Then moved the matching (new) dryer onto the 2 x 4 base and built a smaller version of the base to sit in front of the doors (put the laundry basket on it to transfer clothes out and in and out). I built the dryer base because we had intentions of moving the set upstairs into a large closet that we will build into a main floor laundry when (if) we replace the too steep basement stairs. The top comes off the washer and the whole thing sits in the floor space of one unit. One warranty repair of a leaking door seal.

                        Spend as long as it takes to get the washer perfectly leveled. Trust me on this one!!!

                        We bought it because it uses less water, a lot less soap, and is way gentler on clothing that now lasts much longer. I haven't figured out a pay back schedule, but I really feel that it has paid for itself.

                        Comment

                        • JimD
                          Veteran Member
                          • Feb 2003
                          • 4187
                          • Lexington, SC.

                          #27
                          We were thinking front loader when we purchased our last washer several years ago. My late wife was worried about it fitting well into the laundry room and having to get too close to the floor to load and unload. And units with similar capacity to our top loader were more than I wanted to spend. We ended up with a Fisher Paykel from Lowe's. It is a top loader but spins about as fast as a front loader so the clothers are pretty dry when they go to the dryer. The cost to operate is similar to a front loader. Without the disadvantages. I have had to get much more acquainted with the washer in the last year and I really like it. No problems.

                          Jim

                          Comment

                          • KenBurris
                            Established Member
                            • Jan 2003
                            • 439
                            • Cincinnati, OH, USA.

                            #28
                            me too

                            I have the Fisher Paykel also (Ecosmart), almost 3 years and love it - plastic body, no rust - annual cost of operation $9 with gas water heater, $17 with elec (yeah, my yellow Energyguide sticker is still on it). 3.7 CF capacity - put in detergent, Hit Power, hit Start, walk away - weighs the load and adjusts water level automatically.
                            I found specs for washers here
                            http://www.energystar.gov/index.cfm?c=clotheswash.pr_crit_clothes_washers
                            Ken in Cincinnati

                            Pretend this line says something extremely witty

                            Comment

                            Working...