Breaking freakishly thick concrete...

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Wood_workur
    Veteran Member
    • Aug 2005
    • 1914
    • Ohio
    • Ryobi bt3100-1

    #1

    Breaking freakishly thick concrete...

    Our driveway is about 14" thick in some parts, it all varies, but the thickness is not consistent because it was never installed right. It was just pored over the dirt.

    Anyways, if I were to want to remove it, I know that either a skid steer or a backhoe with a hydraulic hammer, but how powerful would that have to be?

    And would the cost of removing it yourself (which would be the tool rental for a weekend plus the dump trucks to get it all out of there) preparing the site properly and having the pros pour the concrete be more cost effective than having the pros tear it up and then pouring properly?
    Alex
  • cabinetman
    Gone but not Forgotten RIP
    • Jun 2006
    • 15216
    • So. Florida
    • Delta

    #2
    I would contract the whole job out.
    .

    Comment

    • Tom Slick
      Veteran Member
      • May 2005
      • 2913
      • Paso Robles, Calif, USA.
      • sears BT3 clone

      #3
      I agree with cabinetman and it is what I did when I redid my driveway. The price was comparable when all DIY costs were considered. You'll have to haul it away and at 14" thick that little trailer from the rental shop is going to haul it one piece at a time.
      My driveway was 14'x30' by 4-8" thick and it filled a dump truck completely. It was cracked so the operator was able to break it into smaller pieces then pick it up with the hoe/bucket and load it into the truck. IIRC it cost less than $400.

      If you are set on doing it yourself then look into something like
      http://www.crackamite.com/ or http://www.archerusa.com/ but think about how many holes you'll have to drill.
      Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

      Comment

      • cgallery
        Veteran Member
        • Sep 2004
        • 4503
        • Milwaukee, WI
        • BT3K

        #4
        Not to hijack the thread, but can 14" concrete be broken with wedges? The kind one uses for granite?

        Comment

        • Tom Slick
          Veteran Member
          • May 2005
          • 2913
          • Paso Robles, Calif, USA.
          • sears BT3 clone

          #5
          Originally posted by cgallery
          Not to hijack the thread, but can 14" concrete be broken with wedges? The kind one uses for granite?
          but how much work makes it worth it? a driveway is a lot of wedge pounding.
          Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

          Comment

          • cgallery
            Veteran Member
            • Sep 2004
            • 4503
            • Milwaukee, WI
            • BT3K

            #6
            Originally posted by Tom Slick
            but how much work makes it worth it? a driveway is a lot of wedge pounding.
            No, I was talking about a separate (smaller) project. I just wasn't sure if wedges worked well in concrete or not?

            Comment

            • Tom Slick
              Veteran Member
              • May 2005
              • 2913
              • Paso Robles, Calif, USA.
              • sears BT3 clone

              #7
              I think most stone busting techniques will work in concrete unless its got rebar.
              Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison

              Comment

              • gjat
                Senior Member
                • Nov 2005
                • 685
                • Valrico (Tampa), Florida.
                • BT3100

                #8
                The wedges probably won't work in concrete. Concrete will probably spall around the wedge and prevent it creating enough load to crack it.

                14" concrete can be broken up with any sort of jackhammer (bigger than 40#)or demo hammer on a skid steer. You can usually haul it to a concrete recycling center without a disposal fee. They grind it up and use the aggregate for other things.

                I'd do it for myself, but I have free access to everything I need. An air compressor and hammer is probably going to cost about $200 / day. A skidsteer and trailer another couple of hundred. What would take a regualr operator a half a day, would probably take you two days. You can also make a **** of a mess with a skid. It's hard to grade and smooth with them, even for many experienced operators.

                It's more likely the people who would replace the concrete could do it for much cheaper because they would have some equipment there to grade it anyways.
                Last edited by gjat; 04-29-2009, 05:02 AM.

                Comment

                • smorris
                  Senior Member
                  • Apr 2003
                  • 695
                  • Tampa, Florida, USA.

                  #9
                  This will get 'er done. Albeit noisy.
                  Attached Files
                  --
                  Any sufficiently advanced incompetence is indistinguishable from malice

                  Comment

                  • Pappy
                    The Full Monte
                    • Dec 2002
                    • 10481
                    • San Marcos, TX, USA.
                    • BT3000 (x2)

                    #10
                    The section of damaged sidewalk my son and I busted out and removed when I poured the ramp at the front door was only 4' x 6-7'. About as thick as your drive. Hire it out!
                    Don, aka Pappy,

                    Wise men talk because they have something to say,
                    Fools because they have to say something.
                    Plato

                    Comment

                    • crokett
                      The Full Monte
                      • Jan 2003
                      • 10627
                      • Mebane, NC, USA.
                      • Ryobi BT3000

                      #11
                      Hire it out as part of the repaving. They will do the demo cheaper than they would if you were just hiring out the demo because a lot of the equipment will be the same for both jobs.
                      David

                      The chief cause of failure in this life is giving up what you want most for what you want at the moment.

                      Comment

                      • herb fellows
                        Veteran Member
                        • Apr 2007
                        • 1867
                        • New York City
                        • bt3100

                        #12
                        14 inches will put a hurt on you! Definitely hire it out.
                        You don't need a parachute to skydive, you only need a parachute to skydive twice.

                        Comment

                        • Wood_workur
                          Veteran Member
                          • Aug 2005
                          • 1914
                          • Ohio
                          • Ryobi bt3100-1

                          #13
                          Originally posted by smorris
                          This will get 'er done. Albeit noisy.
                          I'd like to keep the house.
                          Alex

                          Comment

                          • AZDude
                            Forum Newbie
                            • Oct 2006
                            • 8
                            • Arizona
                            • BT3100

                            #14
                            Well, if you want some experience on a skid steer with a hydraulic breaker, feel free to come over this weekend. I am working on about a 75'x100' area of my yard - removing large veins of granite and lava rock.

                            Using the skid steer is actually very easy and does not jar much at all. In my yard, I am using a bobcat 753 and going down about 12-14" with not much problem. Out here in AZ, a skid steer and breaker would cost you $300 - $400 for a weekend and another $150 -$200 for a 5yd. dump truck. The rental store would get you the right size skid steer and attachment for you.

                            A concrete contractor can also remove it for you, grade, and then pour for you. Just get a price for removal, and one for the grade and concrete work. Then you can compare costs.

                            Ohh, when I was getting a bid for my yard to remove the rock with a small excavator and breaker attachment, the guy quoted me $175 /hr. Yes you read that right - $175/hr. That figure did not include the $100/trip for the dump truck to haul away. So I chose to do it myself. Hope all my ramblings help.

                            Brent

                            Comment

                            Working...