What's a split point drill bit?
Thanks, guys.
Rick
Thanks, guys.
Rick
-
-
The split point drill bits have a very sharp, pointy edge. That makes it easier to drill exactly on mark and not let the bit slip.
This is just my understanding.Mahfuz in Tyler, TX -
from popular mechanics site:
DrillingAlthough there are many kinds of twist-drill bits, there are two basic types used in everyday metal drilling: high-speed steel (HSS) and carbon steel. HSS bits are preferable because they last longer than carbon steel types. A split-point cobalt steel bit is used for drilling stainless steel and other extremely tough metals (Photo 7). The bit’s split point reduces the tendency of a spinning bit to rotate away from the point at which you want to drill—a phenomenon known as walking. The split point also causes the bit to penetrate the metal more quickly and with less force than is needed with other bits. In many cases, using a split point eliminates the need to mark the hole with a centerpunch.
Loring in Katy, TX USA
If your only tool is a hammer, you tend to treat all problems as if they were nails.
BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questionsComment
-
Thanks, guys. Is there a difference between a split point and pilot point drill bit? Does anyone have a picture of one?
Thanks again,
RickComment
-
IINM a pilot point bit and a split point bit are different designs that are intended to accomplish the same result (prevent "walking" as previously explained).LarryComment
-
I've made a pdf Drill Press Chart available.
It contains the recommended speeds and shows all the various types of Drill Bits that are available.
The Original file was downloaded from Wood Magazine as a "freebie". I just finished going over the Wood Mag's web site and could not find the original file.
Hope you find it useful.
Stop thinking why you can't and Start thinking how you CAN!
Remember, SUCCESS comes in CANS!
GeorgeComment
-
Good info. I stand corrected, what I described is actually the brad point bits.
The picture in the PDF file made it clear.
By the way, IINM = ?Mahfuz in Tyler, TXComment
-
If I'm not mistaken, that means, "If I'm Not Mistaken."quote:Originally posted by mahfuz
By the way, IINM = ?
LarryComment
-
FWIW, IMHO, that should have been:quote:Originally posted by LarryG
If I'm not mistaken, that means, "If I'm Not Mistaken."quote:Originally posted by mahfuz
By the way, IINM = ?
IIRC, it means "If I'm Not Mistaken."
YMMV, HTH
Ray"A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects."
--- Robert A. HeinleinComment
-
IIRC = If I Remember Correctly!
Don, aka Pappy,
Wise men talk because they have something to say,
Fools because they have to say something.
PlatoComment
-
[quote]quote:Originally posted by ElRay
I got all that except ... what does "Ray" mean?FWIW, IMHO, that should have been:
IIRC, it means "If I'm Not Mistaken."
YMMV, HTH
Ray
LarryComment
LCHIEN
Comment