Lumber Quality

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • leehljp
    The Full Monte
    • Dec 2002
    • 8804
    • Tunica, MS
    • BT3000/3100

    #16
    Steve,

    I don't think this is your problem but I will mention it: Some planers are prone to make pits when a dust collector is not used. The chips are thrown around and around and end up in front of the rear roller. Every chip in front of the rear roller is pressed very hard onto freshly planed board, making all kinds of indentions. Very aggravating!
    Hank Lee

    Experience is what you get when you don't get what you wanted!

    Comment

    • ssmith1627
      Senior Member
      • Dec 2005
      • 704
      • Corryton, TN, USA.
      • Ryobi BT3100

      #17
      My DC does a pretty good job picking up the chips. It's only after I've run a board through 4 or 5 times that I need to take the time to clean things up a bit before running more. I've also had tearout when taking too much in one pass which is an obvious easy fix. My real complaint with the jointer and the planer is to know how to handle some of these maple boards where the grain reverses itself mid-board. I try to take the lightest passes possible and I'm sure having sharp blades is a part of that as well.

      I took some pics last night of a walnut board to show you guys, I just didn't get them uploaded. These are holes, not indentions -- so I'm fairly certain it's insect damage.

      Thanks,
      Steve

      Comment

      • ironhat
        Veteran Member
        • Aug 2004
        • 2553
        • Chambersburg, PA (South-central).
        • Ridgid 3650 (can I still play here?)

        #18
        Even if the wood had beetles/ borers you could design some rustic projects in line with the feel of an old piece of furniture or box, etc. I made a presentation case out of wormy chestnut and purposely made the finger joints a bit course so that it would look 'period'. If that's not your style then offer the wood for sale as 'wormy maple' (or whatever the variety). There are folks out there looking for just that sort of thing. It'll work out. Just don't junk in too hastily.

        Later,
        Chiz
        Blessings,
        Chiz

        Comment

        • ssmith1627
          Senior Member
          • Dec 2005
          • 704
          • Corryton, TN, USA.
          • Ryobi BT3100

          #19
          Finally had a minute to get some pics uploaded. Now you can see what I was talking about.

          http://ssmith1627.myphotoalbum.com/v..._0612Smith0049

          http://ssmith1627.myphotoalbum.com/v..._0612Smith0046

          http://ssmith1627.myphotoalbum.com/v..._0606Smith0131

          Steve

          Comment

          • LarryG
            The Full Monte
            • May 2004
            • 6693
            • Off The Back
            • Powermatic PM2000, BT3100-1

            #20
            Yep. Dem's bug tracks, fershure.
            Larry

            Comment

            • SARGE..g-47

              #21
              Morning Steve...

              I would take them rustic or country. I remember back in the late 70"s that Habersham Furniture out of Clarksville, Ga. was the rage with thier country furniture. Outlets selling their brand opened in nearly every high end mall in the Atlanta area and S.E. and their design was "red hot" among the high end crowd at the time.

              One of the traits of that design was they actually paid someone to stand over table tops, etc. all day long with a hammer and a #8 common nail and intentinally lay the head of the nail down and tap it with the hammer randomly over the surface to give it a well used look! Yep.. dents by design. Doctors.. lawyers.. business professionals wives stood in line to get it and have it delivered to impress their guest at the next social bash!

              Go figure..... ha.. ha... ha..ha..ha..

              Regards...

              Comment

              • ssmith1627
                Senior Member
                • Dec 2005
                • 704
                • Corryton, TN, USA.
                • Ryobi BT3100

                #22
                What do you guys do when you're buying lumber ? Simply buy FAS ? Bring a block plane with you to shave a little off and take a look at what's under the rough surface ?

                Steve

                Comment

                • Russianwolf
                  Veteran Member
                  • Jan 2004
                  • 3152
                  • Martinsburg, WV, USA.
                  • One of them there Toy saws

                  #23
                  It depends on what you plan on using it for.

                  Ambrosia Maple is great looking stuff if used for the right piece. Ambrosia Maple is Maple that has been attacked by the Ambrosia Larva and then Fungus has invaded to make the streaks. (Also called Soft Wormy Maple)

                  If you don't want to use it as a focal wood, Wormy wood can be used for interior parts. Drawer carcasses and the like.

                  If I'm being picky, I try to buy Skip Planed wood as you can see the surface of the wood fairly well. But there are times I will buy totally rough lumber just for the surprise. I'll find a way to use it no matter what.
                  Mike
                  Lakota's Dad

                  If at first you don't succeed, deny you were trying in the first place.

                  Comment

                  • Kerf
                    Established Member
                    • Feb 2006
                    • 138

                    #24
                    Steve

                    Maybe if you try to use the wood for a small project, who knows, you might be surprised by the character of the piece.

                    Good luck
                    Nobody is gonna hit as hard as life. But it ain't how hard you hit; it's about how hard you can get hit, and keep moving forward. How much you can take, and keep moving forward. That's how winning is done. Now, if you know what you're worth, then go out and get what you're worth. But you gotta be willing to take the hit, and not pointing fingers saying you ain't where you are because of him, or her, or anybody. Cowards do that and that ain't you. You're better than that! -Rocky Balboa-

                    Comment

                    • LCHIEN
                      Super Moderator
                      • Dec 2002
                      • 22099
                      • Katy, TX, USA.
                      • BT3000 vintage 1999

                      #25
                      Originally posted by Kerf
                      Steve

                      Maybe if you try to use the wood for a small project, who knows, you might be surprised by the character of the piece.

                      Good luck
                      good idea.
                      Loring in Katy, TX USA
                      If your only tool is a hammer, you tend to treat all problems as if they were nails.
                      BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

                      Comment

                      • ssmith1627
                        Senior Member
                        • Dec 2005
                        • 704
                        • Corryton, TN, USA.
                        • Ryobi BT3100

                        #26
                        I think over time I'll learn uses for all of it. I'm certainly not throwing out any wood. I'm just still very new to this. I want plain, flat, straight lumber that I can use to carefully follow the instructions in these magazine plans. I'm not to a point where I can build something of my own design or where I can see a use for this piece or that piece of different types of wood.

                        The learning curve here is steep enough without trying to figure out how to work around insect damage ! haha

                        Thanks for all the input guys.

                        Steve

                        Comment

                        • MikeMcCoy
                          Senior Member
                          • Nov 2004
                          • 790
                          • Moncks Corner, SC, USA.
                          • Delta Contractor Saw

                          #27
                          Steve - you might be surprised how good some of that "scrap" wood looks when a project is finished. I recently got a load of cherry that had more sapwood than heart wood so I decided to make a Mission style end table for my enclosed porch rather than use all the waste on turning practice. I even went so far to use some curly grain laminated legs and just finished it yesterday. A couple of coats of Waterlox and the table has a unique antique look that it isn't going outside.

                          Comment

                          Working...